Reference: 12-009

Brand: Itron

Connection Kit DN20

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Reference: 01-058

Current transformers 200 A SCT024TS 200A/5A

Openable current coils 200A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. Inner diameter of the coil is 23 X 23 mm. External dimensions: Width 52 X Height 76 X Depth 42 mm 1 piece (Buy 3 pieces for three-phase electricity...

Reference: 02-047

Brand: Danfoss

Danfoss ESM-10 replacement sensor indoor

PT1000 Indoor temp sensor Suitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESM 10 and others PT1000-sensors used in building automation.

Reference: 01-034

Electricity meter single phase for camping sites

New 1-phase electricity meters for DIN rail Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide, for camping sites, hambours and so on. No decimals in counter.

Reference: 02-005

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 15 meter

Sensor 15 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 15 meter black silicon cable Chip: Dallas DS18B20

Reference: 13-005

Connection Kit DN15

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 01-065

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-M1 3-phase M-bus meter MID

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 25-002

Chint NL210 jordfelsbrytare typ B single phase

Single phase.

Reference: 01-019

Brand: Hager

Distribution box 6 modules

Distribution box 6 modules, white. For safe installation of electricity meters, relays, circuit breakers, earth leakage circuit breaker mm DIN rail.

Reference: 25-040

Jordfelsbrytare Typ B 40A 30mA - 3P (4-Pol)

Sofielec 3-phase earth fault circuit breaker TYPE B CE-marked Earth fault circuit breaker for charging station for electric cars, electric hybrids, charging hybrids or photovoltaic systems. Ground fault circuit interrupter of TYPE B has been a requirement since 2017 for charging electric cars and in photovoltaic systems. We offer the right switch at an...

Reference: 02-041

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 5 Meter BK

PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor with 5 meter cable, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.

Reference: 26-025

Brand: Inepro

The Mobile Smart Meter INEPRO PRO-Flex Schuko

PRO-Flex  is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.

Reference: 03-013

Power supply 12V, 1.25A, 15W HDR-15-12

Power supply 12V, 1.25A, 15W H Switched power supply 12V 1.25A 15W for DIN rail. The unit has adjustable output voltage 11V to 13V and handels voltage 100V to 240V. The unit has a working temperature of -30°C to + 70°C. This type of power supply has a low idle consumption.

Reference: 25-030

Sofielec JVL 16-63, 300 mA 3-phase residual current device TYPE B

Sofielec JVL 16-63, 3-phase earth leakage circuit breaker TYPE B 300 mA for machine and fire protection.Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits...

Reference: 02-040

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter BK

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 13-002

Brand: Energibutiken, WebIQ AB

Flow meter Qn 2.5, with Pulse Output.

Flow meter Qn 2.5, with Pulse output Flow meter with pulse module for measuring flow in the range 30-5000 l/h with an accuracy better than +-2%

Reference: 15-008

Vibrationsdämpare 4,5 kg till 66 kg

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 25-041

Brand: Chint

Chint NL210 3-phase residual current device TYPE B

Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Reference: 15-004

Brand: Energibutiken, WebIQ AB

Sylodyn vibration dampers for heat pumps

Sylodyn vibration dampers for heat pumps Sylodyn are used with good results as vibration absorbers to heat pumps to reduce structure-borne sound in the house's design due to the vibrations of the compressor and circulating pumps can cause. (Refers to exhaust air, geotermal and ground source heat pumps - not air/air heat pumps)

Reference: 25-020

Personsskyddsbrytare 6A till 16 A

Personal Protection Switch / Personal Protection Automatic Personal protection circuit breaker is a combination of earth fault circuit breaker and miniature circuit breaker, ie it protects against both earth faults and overcurrent. Combined 1-pole circuit breaker and 2-pole circuit breaker. Suitable for protecting separate 1-pole groups, socket groups,...

Reference: 02-025

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 3 meter

PT100 sensor, max 200°C, 3 meter 6 X 50 mm 3-wire universal temperature sensor.Suitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 12-013

Plombering för elmätare och värmemätare