Vibration dampers with washers and nuts
Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.
In about 20% of all heat pump, wall bracket installations, vibrations are going to disturb the owner, with these dampers you can significantly reduce the vibration/noise before it finds its way into the building's construction.
IN Wall bracket kits from the heat pump installer, this type of extra soft vibration dampers are scaresly found, why take a chance to mount standard stiff dampers when you right from the start can make it right!
If you are thinking about replacing your old dampers, make sure you can raise the heat pump outdoor unit with about 10 mm without damaging the gas tubes.
These dampers have been tested in a freezer, at about -20°C, without getting noticeably harder. Top Quality!
With the kit also comes an instruction in Swedish for the assembly - and some tips and tricks to minimize most of the vibration problems that can arise in the installation of a heat pump.
NOTE: If you really do not want to be disturbed by vibrations, I recommend heat pump outdoor unit mounted on a ground stand.
Genreral:
- Set of 4 pcs with washers and nuts (8 washers...8 nuts)
- Height: 30 mm (one standard damper is about 20 mm)
- Width: 30 mm
- Bolt: 2 M8 X 20 mm
- Hardness: 40° shore (standard dampers have 55° shore)
- Maximum weight: 28 kg/vibration damper