Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 219.00
More
In Stock (31 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(3)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 799.00
More
In Stock (156 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (937 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,249.00
More
In stock (148 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,499.00
More
In Stock (11 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (945 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 179.00
More
In Stock (20 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(7)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 620.00
More
In Stock (49 pcs.)
All best sellers
Stålfjäderdämpare
  • Stålfjäderdämpare
  • Stålfjäderdämpare
  • Stålfjäderdämpare
  • Steel vibration dampers 2
  • Steel vibration dampers 3
  • Steel vibration dampers 4

Vibration damper Premium Plus

15-005

Vibration Damper Premium + "Stiff"

A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps.

This + kit has a bit stiffer springs than our "soft" package, especially designed for those who mount in wind exposed areas, eg. in the mountains or by the sea where there are often harsh winds.

Volume discounts

Quantity Unit discount You Save
5 20% Up to SEK 639.00
SEK 639.00
Tax included
Quantity
In Stock (22 in stock)

Description

Vibration Damper Premium + "Stiff"

A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps.

This + kit has a bit stiffer springs than our "soft" package, especially designed for those who mount in wind exposed areas, eg. in the mountains or by the sea where there are often harsh winds. With our soft dampers, really hard winds can cause the outdoor unit to swing in the wind. This kit significantly reduces that risk.

Our hard kit has 6/4 hardness against the soft kit that has hardness 5/3.

Different stiff springs on the compressor side and "free side" mean that the heat pump stands flat, which in turn means that water does not run into the compressor compartment, freeze to ice and cause vibrations when the compressor's own damper stops functioning due to ice. Our mounting kit contains 8 pieces of 20 mm bolts.

We also deliver 6 extra washers that can be used to put on a pair of springs if the machine does not end up exactly on the scale depending on individual weight differences on the market's different make / models.

We dare to say that our vibration damping package is the best and most adapted in the Swedish market.

The springs included in the package are an excellent vibration damper of galvanized steel, the springs is attached to the washers with a special 2-component adhesive that can withstand heat, cold, wet and vibration. This type of vibration damper is not affected by temperature or age, but retains its unique properties over time. An uncompromising vibration damper for those who do not want to gamble.

Internal M8 thread.

Smoother spring: Optimized for about 18-25 kg load on the "lighter side" and should be mounted on the side of the heat pump where the compressor is not seated.

Stiffer spring: Optimized for about 40-50 kg on the compressor side and the higher weight that the compressor causes.

14 pieces, 8.3 x 25 mm.

If you intend to replace your rubber dampers, keep in mind that these dampers are higher than most rubber dampers, so you have to be able to lift the outdoor unit about 2 cm more without the pipes getting damaged.

Product Details
15-005
0
22 Items
7 other products in the same category:

Reference: 15-006

Vibration damper Air to Water

(1)

Steel Spring Isolators. High-quality galvanized steel spring isolators that beats most when it comes to anti-vibration of Air to Water heat pumps, weight of the heat pump can be 100 - 200 kg. Be aware that these dampers are higher than most rubber dampers if you are to replace already fitted rubber dampers.

Price SEK 649.00
More
In Stock (12 pcs.)

Reference: 15-002

Brand: Energibutiken, WebIQ AB

Vibration dampers with washers and nuts

(0)

Vibration dampers with washers and nuts Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.

Price SEK 199.00
More
In Stock (32 pcs.)

Reference: 15-004

Brand: Energibutiken, WebIQ AB

Sylodyn vibration dampers for heat pumps

(1)

Sylodyn vibration dampers for heat pumps Sylodyn are used with good results as vibration absorbers to heat pumps to reduce structure-borne sound in the house's design due to the vibrations of the compressor and circulating pumps can cause. (Refers to exhaust air, geotermal and ground source heat pumps - not air/air heat pumps)

Price SEK 569.00
More
In Stock (8 pcs.)

Reference: 15-016

Vibration damper Premium

(0)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (114 pcs.)

Reference: 15-015

Vibration damper Premium

(0)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (150 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(7)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 620.00
More
In Stock (49 pcs.)
Comments (0)