Cable 2X0.14 mm2

Reference: 22-001

250 OHM Resistor

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Reference: 01-029

Brand: Eastron

Eastron SDM630 MCT M-bus V2 MID 3-phase electricity meter

SDM630 MCT M-bus V2 MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, M-bus communication available suitable for our Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 01-005

Brand: Eastron

SDM630 Modbus MCT V2 3-phase electricity meter (Non MID)

SDM630 Modbus MCT V2 3-phase energy meter. (Non MID) For use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger...

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 52-183

Brand: Energibutiken, WebIQ AB

LED indicator lamp 230 V

LED INDICATOR, 230V, RED This 230 V LED indicator can be used as a status indicator for compressors, circulation pumps, motors, etc., in combination with our "Light sensor 230 V" is it possible, by Logger 2020's I/O-module A/DMIQ show operating status of the objects the indicator is connected to.

Reference: 13-001

Brand: Energibutiken, WebIQ AB

Flow Meter Qp 1.5 with Pulse Output

Flow Meter Qp 1.5 Pulse output Flow meter with pulse output for measurment of flow in the range of 30-3000 liters/h with an accuracy better than +-2%.

Reference: 03-009

Brand: Energibutiken, WebIQ AB

M-bus konverter

M-bus konverter för att kunna koppla Logger 23030 PRO mot våra Actaris Värmemätare med pulsutgångskort + M-bus. OBS! 12V nätdel ingår ej. Klarar upp till 60 stycken enheter anslutna med 12 V 2 A nätdel. Med få enheter anslutna går det bra att köpa vår 12V 1 A nätdel: LÄNK TILL 12 V 1 A NÄTDEL

Reference: 18-001

Brand: Energibutiken, WebIQ AB

IR-thermometer

Measuring range -50 ° C - + 380 ° C Fever thermometer? Read more under "More info". My personal favorite after testing almost 10 different IR thermometers! IR Thermometer Adjustable emissivity Adjustable + - 4.5 ° C Battery included.

Reference: 04-002

Brand: Energibutiken, WebIQ AB

HTMIQ High temp module

HTMIQ High temp module for Logger 2020 and SunLogger 2020 With this module, you can measure temparatures in the range above 125°C (up to 400°C)

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 12-009

Brand: Itron

Connection Kit DN20

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Reference: 02-045

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

PT1000 High temp sensor -50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Reference: 02-015

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 10 Meter, 3-wire

PT1000 sensor, max 200°C, 3-wire, 10 meter 10 meter 3-wire 6 X 50 mm universal temperature sensor, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200° C temp.

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Reference: 05-002

Brand: Energibutiken, WebIQ AB

Pressure Sensor 0-10 Bar

LONN-2SX Pressure transmitter 0-10 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66