Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (381 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (349 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (294 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (695 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (54 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (25 pcs.)
All best sellers
  • Extern onewire 4x20 oled-display

Extern onewire 4x20 oled-display

03-012

External onewire 4x20 oled display

NOTE: Yellow characters.

External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast.

The display has controls US2066 and can also be used with Rasberiy PI, Arduino and the like.

SEK 599.00
Tax included
Quantity
In Stock (10 in stock)

Description

External onewire 4x20 oled display

NOTE: Yellow characters.

External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast.

The display has controls US2066 and can also be used with Rasberiy PI, Arduino and the like.

Product Details
03-012
0
10 Items
Accessories

Reference: 03-036

Black casing for 1-wire OLED display NHD-0420CW-AW3

(0)

Black casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Price SEK 209.00
More
In Stock (5 pcs.)

Reference: 03-037

White casing for 1-wire OLED display NHD-0420CW-AW3

(0)

White casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Price SEK 209.00
More
In Stock (5 pcs.)
16 other products in the same category:

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (294 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 47.00
More
Out-of-Stock

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price SEK 185.00
More
In Stock (24 pcs.)

Reference: 02-049

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 10 meter BK

(0)

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Price SEK 249.00
More
In stock (54 pcs.)

Reference: 23-001

Power supply 12 VDC / 2.1 A

(0)

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Price SEK 295.00
More
In Stock (2 pcs.)

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

(0)

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Price SEK 99.00
More
In Stock (81 pcs.)

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price SEK 249.00
More
In Stock (59 pcs.)

Reference: 04-016

Modul Modbus med 8 analoga ingångar

(0)

Modbus module with 8 analog inputs 8 channels of analog type: 0-20mA / 4-20mA DC, with 12bit AD chip With RS485 MODBUS RTU. Can be combined with industrial configuration software, PLC and touchpad Communication circuit is thunderstorm and interference protected. Works for Logger 3030 PRO Mobus.

Price SEK 775.00
More
In Stock (6 pcs.)

Reference: 02-045

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

(0)

PT1000 High temp sensor -50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Price SEK 289.00
More
In Stock (47 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price SEK 199.00
More
In Stock (15 pcs.)
Comments (0)