Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (381 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (349 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (294 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (695 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (54 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (25 pcs.)
All best sellers
Relay module 12/230 V
  • Relay module 12/230 V
  • Relay module 12/230 V
  • Relay module 12/230 V
  • Relay module 12/230 V
  • Relay module 12/230 V

Relay module 12/230 V

04-024

12 Volt relay module for Logger 1010 & Logger 3030.

Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030.

Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A.

  • Primary: 12 V dc, 0.5 W
  • Secondary: 230 V ac, max 8 A.
Relay module
SEK 229.00
Tax included
Quantity
In stock (16 in stock)

Description

12 Volt relay module for Logger 1010 & Logger 3030.

Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030.

Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A.

  • Primary: 12 V dc, 0.5 W
  • Secondary: 230 V ac, max 8 A.

Examples of areas of use:

Applies if you have one of our loggers, Logger 1010 or Logger 3030, see links under "Accessories" below.

  • Control e.g. your engine heater socket with our timer function
  • Control outdoor lighting with our timer function
  • Control when the water heater is allowed to heat hot water using our hourly price control.
  • Controls when the heat pump is to be blocked due to high electricity price with the help of our hourly price control.

The relay module can be mounted together with Logger 1010, power supply, and any contactors in one and the same standard enclosure.

Product Details
04-024
16 Items

Specific References

EAN13
012823304144
Attachments
Download
Accessories

Reference: 03-013

Power supply 12V, 1.25A, 15W HDR-15-12

(0)

Power supply 12V, 1.25A, 15W H Switched power supply 12V 1.25A 15W for DIN rail. The unit has adjustable output voltage 11V to 13V and handels voltage 100V to 240V. The unit has a working temperature of -30°C to + 70°C. This type of power supply has a low idle consumption.

Price SEK 199.00
More
In Stock (289 pcs.)

Reference: 25-032

63A contactor / Relay 3 modules three phase

(0)

Standard contactor / Relay three phase 63 A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, electric boilers, heat pumps - simply all places where the load exceeds e.g. what a switch or a smaller relay can handle. Can be used as a power relay for control using Logger 1010 or Logger 3030, for three-phase loads...

Price SEK 440.00
More
In Stock (11 pcs.)

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

(0)

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Price SEK 1,099.00
In Stock (182 pcs.)

Reference: 25-043

25A single phase contactor NO

(0)

Standard contactor / Relay single phase 20A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, simply all places where the load exceeds, for example, what a circuit breaker or a smaller relay can handle. For example. you can block the operation of your electric boiler, heat pump or similar when the electricity...

Price SEK 189.00
More
In Stock (31 pcs.)
16 other products in the same category:

Reference: 04-023

Heat conductive paste 20 grams

(0)

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 99.00
More
In Stock (1 pcs.)

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price SEK 185.00
More
In Stock (24 pcs.)

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

(0)

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 329.00
More
In Stock (13 pcs.)

Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

(0)

PT1000 High temp sensor -50 to +200°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Price SEK 360.00
More
In Stock (41 pcs.)

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

(2)

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Price SEK 1,395.00
More
In stock (278 pcs.)

Reference: 01-007

Brand: Energibutiken, WebIQ AB

SDM630 M-bus MID 3-phase electricity meter

(0)

SDM630 Mbus MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, Mbus RTU communication available suitable for our Logger 1010 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (297 pcs.)

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price SEK 159.00
More
In Stock (2 pcs.)

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price SEK 249.00
More
In Stock (59 pcs.)
Comments (0)