Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Reference: 04-015

Kopplingsplint 2.5 mm2 12-polig

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Reference: 12-013

Plombering för elmätare och värmemätare

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 04-011

Brand: Energibutiken, WebIQ AB

Ethernet cable

Ethernet cable Unshielded cabling consisting of a 4-pair cable, Category 5e (Cat 5e), and an RJ45 connector on both ends. This cable are needed to connect Logger 2020 to your router if you want to run your Logger 2020 against the web service e-logger.se - or if you need to update the software in your Logger 2020.Select cable length before adding to cart.

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 26-037

Kopplingsdosa IP65

Reference: 25-012

Dvärgbrytare - Automatsäkring 10 - 63 A

Reference: 26-031

Stickpropp PVC Schuko

Reference: 26-034

Skarvuttag Svart PVC

Reference: 26-035

Stickpropp CEE16

Reference: 04-008

Brand: Energibutiken, WebIQ AB

Junction Box

Junction Box Junction box, with five-pole terminal block. To connect the temperature sensors and electricity sensors cables to Logger 2020.

Reference: 01-044

Likströms Shunt

Reference: 26-036

Skarvuttag CEE16

Reference: 22-001

250 OHM Resistor

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Reference: 16-001

Brand: 3M

3M 1100 Hörselskydd / Hörselproppar / Öronproppar

5-pack 3M 1100 Hörselproppar av bästa möjliga kvalitet, 3M 1100 är en öronpropp som jag personligen anser vara marknadens bästa hörselproppar. Jag har i decennier använt proppar, först som anställd inom industrin i över 20 år, men även (då liksom nu) när jag sovit, kört MC, skoter och ATV - och har under årens lopp provat mer eller mindre allt som finns...

Reference: 20-011

Brand: Energibutiken, WebIQ AB

Wired door/window magnetic sensor

Wired magnetic sensor that fits Energibutikens all alarm systems.

Reference: 01-057

Distribution box for 2 modules Hager GD102N

Distribution box for 2 modules, white. For safe installation of relays and or single-phase electricity meter. Fits our 2 module wide electricity meters.

Reference: 12-009

Brand: Itron

Connection Kit DN20

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Reference: 03-033

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 03-032

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 12-018

Digital termometer hygrometer

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.