- On sale!

Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-004
Brand: Eastron
SDM630 Modbus MID V2, 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
Suitable for indoor measurements in the temperature range -35 to +70 ° C..
Can replace Danfoss ESM 10 and others PT1000-sensors used in building automation.
Suitable for indoor measurements in the temperature range -35 to +70 ° C..
Can replace Danfoss ESM 10 and others sensors used in building automation.
General:
Reference: 02-040
Brand: Energibutiken, WebIQ AB
PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12
Reference: 02-054
Brand: Energibutiken, WebIQ AB
PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 2-wire universal temperature sensor with 5 meter cable, suitable for Logger 3030, Logger 3030 PRO Modbus and Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-028
Brand: Energibutiken, WebIQ AB
PT100 High temp sensor -50 to +400°C 2-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. Note this model cannot be connected to the Logger 3030.
Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 02-038
Brand: Energibutiken, WebIQ AB
Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20
Reference: 02-011
Brand: Energibutiken, WebIQ AB
PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.
Reference: 02-021
Brand: Energibutiken, WebIQ AB
PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included
Reference: 02-014
Brand: Energibutiken, WebIQ AB
PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 2-wire universal temperature sensor with 5 meter cable, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.
Reference: 02-018
Brand: Energibutiken, WebIQ AB
PT1000 tube surface sensor 5 meter 3-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Can replace Danfoss ESMC
Reference: 02-042
Brand: Energibutiken, WebIQ AB
PT1000 sensor, max 200°C, 3-wire, 10 meter 10 meter 3-wire 6 X 50 mm universal temperature sensor, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200° C temp.
Reference: 02-044
Brand: Energibutiken, WebIQ AB
PT100 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.
Reference: 02-017
Brand: Energibutiken, WebIQ AB
PT1000 3-wire tube surface sensor Sensor, affordable 3-wire PT1000B temperature sensor, 1 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Can replace Danfoss ESMC.
Reference: 02-053
Brand: Energibutiken, WebIQ AB
PT1000 sensor, max 200°C, 3 meter 6 X 50 mm 3-wire universal temperature sensor.Suitable for measurement of all media that does not get more than 200°C hot.
Reference: 02-013
Brand: Energibutiken, WebIQ AB
PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12
Reference: 02-039
Brand: Energibutiken, WebIQ AB
Sensor 1 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 1 meter cable, 3.5 mm diameter Chip: Dallas DS18B20
Suitable for indoor measurements in the temperature range -35 to +70 ° C..
Can replace Danfoss ESM 10 and others PT1000-sensors used in building automation.