Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (351 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (299 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (232 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (665 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (51 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (15 pcs.)
All best sellers
1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)

PT100 outdoor temp sensor

02-023

PT100 Outdoor temp sensor

Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ

Suitable for outdoor measurements in the temperature range -50°C ... +90°C.

Can replace sensors used in PT100-based building automation systems

Volume discounts

Quantity Unit discount You Save
5 20% Up to SEK 249.00
SEK 249.00
Tax included
Quantity
In Stock (25 in stock)

Description

PT100 Outdoor temperature sensor

Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ

Suitable for outdoor measurements in the temperature range -50°C ... +90°C.

Can replace sensors used in PT100-based building automation systems

General:

  • Temperature Sensor: PT100
  • Measuring current: approx 1mA
  • Housing: Glass fiber reinforced polyamide - pure white
  • Dimensions: 66 x 60 x 39mm
  • Connection: Screw terminals on circuit boards max. 1.5 mm²
  • Protection: IP65
  • Range: -50°C ... 90°C
Product Details
02-023
02023
25 Items
16 other products in the same category:

Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

(0)

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Price SEK 249.00
More
In stock (176 pcs.)

Reference: 02-066

PD3060E- PT100 6-chanel Modbus RTU with Display

(0)

PD3060E- PT100 6-chanel Modbus RTU with Display The PD3060E - PT100 is a PT100 temperature sensor module (thermoresistive device or RTD) that supports up to 6 sensor inputs. It can connect 2-wire and 3-wire PT100 sensors. The temperature reading is obtained using the RS-485 communication interface via the ModBus RTU protocol. Ideal for connection to PLC,...

Price SEK 889.00
More
Product available for orders (0 pcs.)

Reference: 02-049

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 10 meter BK

(0)

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Price SEK 249.00
More
In stock (51 pcs.)

Reference: 02-044

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 5 meter BK

(0)

PT100 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Price SEK 199.00
More
In stock (33 pcs.)

Reference: 04-022

Heat conductive paste 3 grams

(0)

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 29.00
More
In Stock (5 pcs.)

Reference: 04-023

Heat conductive paste 20 grams

(0)

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 99.00
More
In Stock (32 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 47.00
More
Out-of-Stock

Reference: 02-026

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 10 meter

(0)

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Price SEK 310.00
More
In stock (33 pcs.)

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

(0)

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Price SEK 159.00
More
In Stock (6 pcs.)

Reference: 07-010

Temp pocket for ventilation

(0)

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Price SEK 29.00
More
In Stock (21 pcs.)
Comments (0)