Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 219.00
More
In Stock (33 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(3)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be!

Price SEK 779.00
More
In Stock (312 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (1047 pcs.)

Reference: 01-004

Brand: Eastron

SDM630 Modbus MID V2, 3-phase electricity meter

(0)

SDM630 Modbus MID V2, 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,149.00
More
In stock (200 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,450.00
More
In Stock (26 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 179.00
More
In Stock (27 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (975 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(7)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 620.00
More
In Stock (17 pcs.)
All best sellers
1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)
  • 1-wire temperaturgivare (3-tråd)

Dallas 1-wire PRO outdoor sensor

02-002

1-wire PRO Outdoor sensor

Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)
Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Volume discounts

Quantity Unit discount You Save
3 10% Up to SEK 65.70
5 15% Up to SEK 164.25
SEK 219.00
Tax included
Quantity
In Stock (45 in stock)

Description

Dallas 1-wire PRO outdoor sensor

Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030, Logger 3030 PRO Modbus and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)

Also suitable for Aurdino and Raspberry Pi micro computers.

Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

The sensor is mounted on a circuit board that also includes a screw terminal of high quality where you connect the cable that is connected between the logger and sensors inside.

General:

  • Temperature sensors: Dallas DS18B20
  • Enclosure: White plastic, 66 X 60 X 39 mm
  • Connector: 3-pole screw terminal max 1.5 mm2
  • Cable Length: -
  • Protection: IP65
  • Measuring range: -55 ... 125 ° C (plastic casing withstands -50 ° C to +90 ° C)

This type of temperature sensor is very accurate, calibrated in the factory.

Each sensor has a unique identity, you name them after himself in the PC software or web service to what you see fit.

Product Details
02-002
02002
45 Items
16 other products in the same category:

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price SEK 129.00
More
In Stock (5 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 47.00
More
Out-of-Stock

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

(0)

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Price SEK 199.00
More
In stock (127 pcs.)

Reference: 02-007

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 2 meter

(0)

Tube surface Sensor Affordable 2 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 189.00
More
In Stock (42 pcs.)

Reference: 04-022

Heat conductive paste 3 grams

(0)

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 29.00
More
In Stock (45 pcs.)

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

(0)

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Price SEK 169.00
More
In stock (102 pcs.)

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

(0)

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Price SEK 129.00
More
In Stock (10 pcs.)

Reference: 02-039

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 1 meter BK

(0)

Sensor 1 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 1 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Price SEK 119.00
More
In stock (170 pcs.)

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price SEK 99.00
More
In Stock (10 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price SEK 125.00
More
In Stock (11 pcs.)

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

(0)

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Price SEK 219.00
More
In Stock (40 pcs.)

Reference: 07-010

Temp pocket for ventilation

(0)

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Price SEK 29.00
More
In Stock (17 pcs.)

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 219.00
More
In Stock (33 pcs.)

Reference: 02-038

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 2 meter

(0)

Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Price SEK 149.00
More
In stock (83 pcs.)
Comments (1)
Grade