Reference: 12-012

Batteri CF-E II,CF51/55

Reference: 01-006

Brand: Eastron

Eastron SDM230 modbus MID Electricity meter single phase

Single phase MID certified electricity meter with Modbus and doubble pulse putput Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1%...

Reference: 19-001

Voucher 500 SEK

Voucher 500 SEK

Reference: 15-016

Vibration damper Premium

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Reference: 15-015

Vibration damper Premium

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Reference: 29-002

Väggkonsol för Luftvärmepump

Reference: 13-006

Brand: Itron

Flow meter Qn 2.5

Flow meter Qn 2.5. Water meter Qn 2.5 cold water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical mounting.

Reference: 01-026

Current transformer 3X300A/1A ESCT-345 300/1

Eastron ESCT-345 3 X 300/1 A Current transformer Can be used with our SDM630MCT V2 electricity meters. Opening för cable 3 pieces 32 X 32 mm 52 X 92 X 152 mm (W x H x L) Weight 0.65 kg

Reference: 27-001

Earth fault switch 4P, 40A, 30mA Type A

Earth fault switch 4P, 40A, 30mA Type A Standard earth fault switch for personal protection 30 mA, three phase max 40A.

Reference: 25-032

63A contactor / Relay 3 modules three phase

Standard contactor / Relay three phase 63 A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, electric boilers, heat pumps - simply all places where the load exceeds e.g. what a switch or a smaller relay can handle. Can be used as a power relay for control using Logger 1010 or Logger 3030, for three-phase loads...

Reference: 01-030

Distribution box for 13 modules, Schneider RESI9

Distribution box for 13 modules, white. For safe installation of relays and / or electricity meters for DIN rail.

Reference: 02-052

Brand: Energibutiken, WebIQ AB

Temperature - Humidity - Light-sensor module THLIQ-02

Temp / Humidity / Light Module THLIQ-02 High quality module with built-in temperature, humidity and light sensor, based on temp/humidity sensor Bosch GY-BME280. Fits Logger 3030 and Logger 3030 PRO Modbus

Reference: 20-002

Brand: Energibutiken, WebIQ AB

Name: Wired Flashing & Sound Siren

Name: Wired Flashing & Sound Siren ◆Wired Flashing & Sound Siren;◆Installation: wall-mounted;◆Power: DC9-12V;◆Sound level:100-110dB;◆Color: Red;◆Rated current: 250mA;◆Material: ABS;◆Operation Temp: –10°C to +50°C;◆Humidity: 5%--95% non-condensing;◆Unit Weight: 120g;

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Reference: 01-023

Electricity meter single phase Eastron SDM230DR MID

Single-phase MID-certified electricity meter Eastron SDM230DR MID. Easy to use electricity meter with the extra twist! Fixed counter + resettable counter (tripmeter) + power display. The electricity meter has illuminated display, pulse output and is MID certified. The power measurement shows exactly how many watts currently consumed!

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Reference: 01-060

Electricity meter single phase for coil Modbus

Affordable electricity meter with Modbus port and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Reference: 01-059

Electricity meter single phase for coil M-bus

New 1-phase electricity meters SDM120CTMB M-bus MID Affordable electricity meter with both flashing diode and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Reference: 26-038

Safety switch 3-pol

Safety switch The enclosure of the ABB´s side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets (IP65), and hence built for outdoor and indoor use.

Reference: 02-005

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 15 meter

Sensor 15 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 15 meter black silicon cable Chip: Dallas DS18B20

Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

PT1000 High temp sensor -50 to +200°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Reference: 01-033

copy of Distribution box 8 modules premium

Distribution box 8 modules Premium, white. For safe installation of electricity meters, relays, circuit breakers, earth leakage circuit breaker mm DIN rail.

Reference: 11-001

Brand: Energibutiken, WebIQ AB

Sound Level Meter

This digital sound level meter is an instrument for the measurement of sound pressure level in decibels (dB). The meter has a large measurement range (30 - 130 dB ) and Max Hold function . The gauges are brand new. Measuring range : 30 - 130dB

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 18-001

Brand: Energibutiken, WebIQ AB

IR-thermometer

Measuring range -50 ° C - + 380 ° C Fever thermometer? Read more under "More info". My personal favorite after testing almost 10 different IR thermometers! IR Thermometer Adjustable emissivity Adjustable + - 4.5 ° C Battery included.

Reference: 26-033

Safety switch Garo 2-pol

Safety switch Garo safety switches can handle 16A and have a 2-pole connection, this product is available in white with a black knob. The outer screws are made of stainless steel. The seal between box and lid is a weather- and oil-resistant gasket made of chloroprene rubber, which means that it is IP65 and suitable both indoors and outdoors. ATTENTION!...

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Reference: 25-042

25A Kontaktor 3-fas NO