Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (438 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (77 pcs.)
All best sellers

Safety switch Garo 2-pol

26-033

Safety switch

Garo safety switches can handle 16A and have a 2-pole connection, this product is available in white with a black knob. The outer screws are made of stainless steel. The seal between box and lid is a weather- and oil-resistant gasket made of chloroprene rubber, which means that it is IP65 and suitable both indoors and outdoors.

ATTENTION! Only 1-phase safety switch with earth and neutral terminal.

SEK 319.00
Tax included
Quantity
In Stock (29 in stock)

Description

Safety switch

Garo safety switches can handle 16A and have a 2-pole connection, this product is available in white with a black knob. The outer screws are made of stainless steel. The seal between box and lid is a weather- and oil-resistant gasket made of chloroprene rubber, which means that it is IP65 and suitable both indoors and outdoors.

ATTENTION! Only 1-phase safety switch with earth and neutral terminal.

The cable entries are threaded and have knockouts for 2 parallel cables both at the top and bottom. The knob is lockable with a padlock and the lid is locked in the closed position. There are neutral and PE connections in the enclosure.

According to ELSÄKERHETSVERKET's High Current regulations, all new installations of e.g. Air source heat pumps or other permanently installed machines should be equipped with a Safety Switch.

C62.2 Separation The plant part on which work is to be carried out must be separated. Components that are still live after separation, for example capacitors and cables, must be discharged with a suitable device. Advice: Where the power supply can take place from several directions or when there are several electrical switches, special care is required to prevent mistakes. Among other things, all windings need to be separated when working on the transformer. The magnetizing circuits of machines and the neutral point that is not directly grounded must be isolated if voltage can be applied from another part of the installation. In order to achieve the necessary safety, separation should take place in one of the following ways: 1.3 Use of safety switches.

ATTENTION! Only 1-phase safety switch with earth and neutral terminal.

Dimensions

Width: 115 mm

Height: 137 mm

Depth: 60 mm

Weight: 0.29 kg

Technical data

Version as service/repair switch: Yes

Version as safety switch: Yes

Max rated operating voltage Ue at AC: 690 V

Nominal operating voltage: 400...690 V

Nominal continuous current Iu:16 A

Conditional nominal short-circuit current Iq: 25 kA

Number of poles: 2

Device construction method: Complete device in enclosure

Suitable for four-hole front mounting: Yes

Suitable for central front mounting: Yes

Suitable for installation in distributions: Yes

Suitable for intermediate assembly: Yes

Color of operating element: Black

Type of control element: Rocker

Can be blocked: Yes

Main circuit connection method: Cable clamp

Protection class (IP), front: IP65

Protection Level (NEMA)

Product Details
26-033
0
29 Items
16 other products in the same category:

Reference: 04-024

Brand: Finder

Relay module 12/230 V

(0)

12 Volt relay module for Logger 1010 & Logger 3030. Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030. Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A. Primary: 12 V dc, 0.5 W Secondary: 230 V ac, max 8 A.

Price SEK 229.00
In stock (5 pcs.)

Reference: 25-034

Elcentral 13 Moduler

(0)

Distribution Box 13 Modules A distribution box for you who are constucting new buldings och renovating old buildings. The distribution box is suitable for: Garage 'Storehouse Workshop Holiday home Cottages Sheds Warehouses Machine halls,

Price SEK 899.00
In Stock (10 pcs.)

Reference: 25-020

Personsskyddsbrytare 6A till 16 A

(0)

Personal Protection Switch / Personal Protection Automatic Personal protection circuit breaker is a combination of earth fault circuit breaker and miniature circuit breaker, ie it protects against both earth faults and overcurrent. Combined 1-pole circuit breaker and 2-pole circuit breaker. Suitable for protecting separate 1-pole groups, socket groups,...

Price SEK 249.00
In Stock (14 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 26-027

Adapter Schuko to CEE16

(0)

Adapter Schuko male to CEE16 female Is an advisor to be able to connect eg. Our mobile electricity meter with CEE16 connectors for a standard wall outlet. 0.4 m cable length, Max 16A

Price SEK 199.00
More
In Stock (2 pcs.)

Reference: 26-002

Power supply for charging station

(1)

Electric box for charging stations Complete power supply for charging stations to electric cars and charging hybrids 10-63A (Select in the drop-down list).Contains Electricity Meter SDM72DR, Chint NL210 3-phase earth leakage circuit breaker TYP B and three-phase automatic circuit breaker 10-63A.

Price SEK 2,485.00
In Stock (50 pcs.)

Reference: 25-043

25A single phase contactor NO

(0)

Standard contactor / Relay single phase 20A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, simply all places where the load exceeds, for example, what a circuit breaker or a smaller relay can handle. For example. you can block the operation of your electric boiler, heat pump or similar when the electricity...

Price SEK 189.00
More
In Stock (41 pcs.)
Comments (0)