INEPRO three phase electric meter PRO380 Modbus CT
For more detailed information on this meter, refer to the MANUAL.
features
Three phase active energy meter
Conforms and Certified for MID B and D Standard (Can be used for billing purposes)
For cuccent coils with 1 or 5 A output.
Double tariff can be activated if required
70mm wide / 4 modules
Bracket for your rack
LCD screen 5 + 2 = 99999.99
Measuring voltage 230V 50 Hz
Total Energy Calculation: Forward, Forward + Backward, Forward-Backward, Reverse Forward, Backward (Import, Import + Export, Import-Export, Export-Import or Export)
Pulse S0 can be set selectable as below (1000 pulses / kWh on delivery)
Pulse output rate: 10,000, 2,000, 1,000, 100, 10, 1, 0.1 or 0.01 imp / kWh
Integrated communication protocols are pulse output and Modbus
details
The PRO380 Modbus is a three-phase electric meter with many features, it has over 60 different measurement values that can be displayed, such as kWh, active and reactive energy, import and export and Cos phi. The PRO380 smart energy meter is equipped with a reset trip counter and the total energy usage can be calculated through 5 different modes.
For cuccent coils with 1 or 5 A output. The 4-module wide power gauge features translucent casing and red removable cover covers over the terminals, making the PRO380 a unique and compact meter for high quality. The electricity meter is easy to connect, easily programmable and easy to navigate through the two buttons on the front.
The PRO380-Mb has a adjustable S0 output. The meter's total counting can be calculated through 5 different modes. The ability to read import and export makes the PRO380 the perfect energy meter for solar systems.
Modbus
The Modbus bus version of the PRO380 series can be integrated into all M bus installations combined with all types of gas, water, heating and other electricity meters. When looking for a very cost-effective meter that allows remote reading, the PRO380 Modbus is the best choice. This meter is equipped with the European standard for Modbus protocols.
5 years full warranty
PRO380 smart energy meter delivered with good quality and 5 year warranty.
Inepro Metering is a manufacturer and supplier of smart energy meters. By keeping internal development, they can customize hardware and software to meet your specific needs. With Inepro's smart meter, you are guaranteed a correct communication between meters and systems. Our meters can be used for various projects, such as solar installations, home & building automation. If you need a special setup of your meters, contact us and we will make sure your meters are programmed as you want them from the factory.
Technical specifications
Height with protective covers: 140mm
Height without protective covers: 92.4 mm
Width: 70mm
Depth: 63mm
Mounting: DIN rail
Active Energy: ± 1%
Impulse S0 Duration: T-on: 45ms T-Off: 270ms T-T: 140us
Humidity in operation: ≤75%
Storage Humidity: ≤ 95%
Operating Temperature: -25 ° ... + 55 ° C
Storage temperature: -30 ° ... + 70 ° C
Rated Voltage (Un): 230 / 400V AC
Operating voltage: 100 / 173V ... 270 / 468V
AC voltage resists in 1 min: 4KV
Pulse Voltage 1.2uS Waveform: 6KV
Grundström (Ib): 5A
Max current (Imax): For cuccent coils with 1 or 5 A output.
Operating current range: 0.4% Ib ~ Imax (Shows less than 1% error in the range 20mA to 100A)
Overcurrent resistance: 30Imax for 0.01s
Operating frequency range: 45-60Hz
Int. power consumption: ≤2W / phase - ≤10VA / phase
International Standard / Protocol: EN50470-3
IP protection: 51
Protection class: II
The calculation of total energy can be done in 5 different ways: import, import + export, import-export, export-import or export
Please note :-
All PRO380 series meters can be read and configured via IR. The standard used is IRDA (IEC62056-21: 2002 (IEC1107)).
IR converters and associated software can be ordered separately, contact us if so.
