- Pack

Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
The PRO-flex is a practical and simple solution that allows you to measure the energy consumption of mobile energy
users / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a complete
and costly infrastructure per location.
The PRO-flex is a practical and simple solution that allows you to measure the energy consumption of mobile energy
users / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a complete
and costly infrastructure per location.
• unique design
• Inepro MID approved meter inside
• suitable for billing purposes
• IP 44 (cable) 54 (casing)
• 2,5mm2 H07RN-F cable
• CEE16 plug
• cable lenght 2 x 50cm
• max 16amp
• camping’s
• marina’s
• home appliances
• construction sites
• exhibition centres
• market’s
Height casing : 92mm
Width casing : 156mm
Depth casing : 52,5mm
Cable length per side : 500mm
Active energy : ±1%
Starting current : 0,05Ib
Nominal Voltage (Un) : 230V AC
Basic current (Ib) : 5A
Max current (Imax) : 16A
Basic error : standard
International standard : EN50470-3
IP protection : 54 (casing), 44 (cable)
Protective class : II
Connection mode : U
Warranty : 12 months full warranty
Reference: 01-071
Openable current coils 600A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. SCT036TS-600A-5A Inner diameter of the coil is 35 mm. External dimensions: W: 66mm X H: 94mm X D: 46mm 1 piece (buy 3 pieces for three-phase electricity...
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 29-001
PickData LoRa Bridge for Modbus Wireless is used for reading wireless bus units. Perfect when, for example, electricity meters in different buildings need to be read off and it is difficult to pull cable.
Reference: 01-002
Brand: Eastron
SDM72 Bi, Bidirectional electricity meter 3-phase electricity meters with plain solid counters, power meter that shows exactly how many watts that is currently consumed and a resettable trip-counters. 4 modules wide. For 35 mm DIN rail. Step throug the 6 different modes with push button on the front. Perfect for those who want to monitor the house,...
Reference: 01-066
Brand: Carlo Gavazzi
Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.
Reference: 01-036
Distribution box for 26 modules, white. For safe installation of relays and / or electricity meters for DIN rail.
Reference: 26-001
Electric box for charging stations Complete power supply for charging stations to electric cars and charging hybrids 10-63A (Select in the drop-down list).Contains Electricity Meter SDM630 Modbus MID, Chint NL210 3-phase earth leakage circuit breaker TYP B and three-phase automatic circuit breaker 10-63A.
Reference: 01-024
Eastron ESCT-325 3 X 100/1 A Current transformer Can be used with our SDM630MCT V2 electricity meters. 78 X 80 X 77 mm (W x H x L) Weight 0.4 kg
Reference: 26-025
Brand: Inepro
PRO-Flex is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.
Reference: 01-061
The SDM630MCT-Lora is a new generation three phase multi function energy meter with wireless communication Lora module built inside. with public Lora protocol, the user can easily build a wireless meter reading system.
Reference: 01-060
Affordable electricity meter with Modbus port and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.
Reference: 01-012
Brand: Energibutiken, WebIQ AB
Split core Current transformer 200A / 5A Inner diameter for coils are 21 X 32 mm. Fits our three-phase electricity meter SDM630 MCT V2 and the single-phase meters SDM120D CTM and CTMB.Exterior dimensions: Width 87 X Height 105 X Depth 32 mm1 piece (Buy 3 pieces for a three-phase electricity meter)Accuracy 0.5%NOTE! Check cable dimensions. Compare with the...
Reference: 01-039
Openable Power Coils 3000A / 5A, Top Quality! Inner diameter of the coil is 80 X 160 mm. Fits our electricity meters SDM630 MCT V2, SDM120CTM, SDM120CTMB External dimensions: 175 X 245 X 72 mm Weight / spool 2,945 kg Includes 1 pcs (Buy 3 pcs to three-phase electricity meters) Accuracy 0.5%
The PRO-flex is a practical and simple solution that allows you to measure the energy consumption of mobile energy
users / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a complete
and costly infrastructure per location.