Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (62 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (478 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (426 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (329 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (102 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (50 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(14)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (64 pcs.)
All best sellers
  • INEPRO PRO380 M-bus trefas elmätare
  • INEPRO PRO380 M-bus trefas elmätare

INEPRO PRO380 Modbus - CT

01-081

INEPRO three phase electric meter PRO380 Modbus CT
For more detailed information on this meter, refer to the MANUAL.

For cuccent coils with 1 or 5 A output.

features
Three phase active energy meter
Conforms and Certified for MID B and D Standard (Can be used for billing purposes)
100A online

Volume discounts

Quantity Unit discount You Save
2 5% Up to SEK 239.90
5 10% Up to SEK 1,199.50
10 20% Up to SEK 4,798.00
SEK 2,399.00
Tax included
Quantity
In Stock (3 in stock)

Description

INEPRO three phase electric meter PRO380 Modbus CT
For more detailed information on this meter, refer to the MANUAL.

features
Three phase active energy meter
Conforms and Certified for MID B and D Standard (Can be used for billing purposes)
For cuccent coils with 1 or 5 A output.
Double tariff can be activated if required
70mm wide / 4 modules
Bracket for your rack
LCD screen 5 + 2 = 99999.99
Measuring voltage 230V 50 Hz
Total Energy Calculation: Forward, Forward + Backward, Forward-Backward, Reverse Forward, Backward (Import, Import + Export, Import-Export, Export-Import or Export)
Pulse S0 can be set selectable as below (1000 pulses / kWh on delivery)
Pulse output rate: 10,000, 2,000, 1,000, 100, 10, 1, 0.1 or 0.01 imp / kWh
Integrated communication protocols are pulse output and Modbus

details
The PRO380 Modbus is a three-phase electric meter with many features, it has over 60 different measurement values ​​that can be displayed, such as kWh, active and reactive energy, import and export and Cos phi. The PRO380 smart energy meter is equipped with a reset trip counter and the total energy usage can be calculated through 5 different modes.

For cuccent coils with 1 or 5 A output. The 4-module wide power gauge features translucent casing and red removable cover covers over the terminals, making the PRO380 a unique and compact meter for high quality. The electricity meter is easy to connect, easily programmable and easy to navigate through the two buttons on the front.
The PRO380-Mb has a adjustable S0 output. The meter's total counting can be calculated through 5 different modes. The ability to read import and export makes the PRO380 the perfect energy meter for solar systems.

Modbus
The Modbus bus version of the PRO380 series can be integrated into all M bus installations combined with all types of gas, water, heating and other electricity meters. When looking for a very cost-effective meter that allows remote reading, the PRO380 Modbus is the best choice. This meter is equipped with the European standard for Modbus protocols.
 
5 years full warranty
PRO380 smart energy meter delivered with good quality and 5 year warranty.

Inepro Metering is a manufacturer and supplier of smart energy meters. By keeping internal development, they can customize hardware and software to meet your specific needs. With Inepro's smart meter, you are guaranteed a correct communication between meters and systems. Our meters can be used for various projects, such as solar installations, home & building automation. If you need a special setup of your meters, contact us and we will make sure your meters are programmed as you want them from the factory.

Technical specifications
Height with protective covers: 140mm
Height without protective covers: 92.4 mm
Width: 70mm
Depth: 63mm
Mounting: DIN rail
Active Energy: ± 1%
Impulse S0 Duration: T-on: 45ms T-Off: 270ms T-T: 140us
Humidity in operation: ≤75%
Storage Humidity: ≤ 95%
Operating Temperature: -25 ° ... + 55 ° C
Storage temperature: -30 ° ... + 70 ° C
Rated Voltage (Un): 230 / 400V AC
Operating voltage: 100 / 173V ... 270 / 468V
AC voltage resists in 1 min: 4KV
Pulse Voltage 1.2uS Waveform: 6KV
Grundström (Ib): 5A
Max current (Imax): For cuccent coils with 1 or 5 A output.
Operating current range: 0.4% Ib ~ Imax (Shows less than 1% error in the range 20mA to 100A)
Overcurrent resistance: 30Imax for 0.01s
Operating frequency range: 45-60Hz
Int. power consumption: ≤2W / phase - ≤10VA / phase
International Standard / Protocol: EN50470-3
IP protection: 51
Protection class: II
The calculation of total energy can be done in 5 different ways: import, import + export, import-export, export-import or export

Please note :-
All PRO380 series meters can be read and configured via IR. The standard used is IRDA (IEC62056-21: 2002 (IEC1107)).
IR converters and associated software can be ordered separately, contact us if so.

Product Details
01-081
1134956000094
3 Items
Accessories

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

(0)

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Price SEK 1,099.00
In Stock (187 pcs.)
16 other products in the same category:

Reference: 01-006

Brand: Eastron

Eastron SDM230 modbus MID Electricity meter single phase

(0)

Single phase MID certified electricity meter with Modbus and doubble pulse putput Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1%...

Price SEK 505.00
More
In Stock (78 pcs.)

Reference: 01-078

Brand: Carlo Gavazzi

Electricity meter 3-phase Carlo Gavazzi EM330-HS1 Modbus for measuring with current coils

(0)

Electricity meter 3-phase Carlo Gavazzi EM330-HS1 Modbus for measuring with current coils Three-phase electricity meter with Modbus for measuring with current coils, model designation: EM330DINAV53HS1PFB for 3-phase (65A/400V). Approved for debit metering, used for net metering/production. Can be logged with Logger 1010 Modbus.

Price SEK 1,759.00
More
In Stock (15 pcs.)

Reference: 01-040

Current transformers 150 A SCT024TS 150A/5A

(0)

Current transformer 150A / 5A Inner diameter of the coil is 23 X 24 mm. Fits our electric meters SDM630 MCT V2 and Elmätare 3-fas Carlo Gavazzi EM330-HM1 M-bus MID för mätning med strömspolar. . External dimensions: 45 X 41 X 76 mm NOTE! when buying, choose 1 pc for single-phase, 3 pcs for three-phase electricity meters. Accuracy 0.5%

Price SEK 179.00
More
In Stock (257 pcs.)

Reference: 01-069

Brand: Carlo Gavazzi

Carlo Gavazzi EM111-O1 single-phase puls meter

(0)

Carlo Gavazzi EM111-O1 single-phase puls meter Single-phase energy analyzer with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in MID applications up to 45 A (direct connection)

Price SEK 595.00
More
In Stock (122 pcs.)

Reference: 01-041

Current transformers SCT12080QT 1500A/5A

(0)

Openable Current Coils 1500A/5A, Top Quality! Inner diameter of the coil is 80 X 120 mm. Fits our electricity meters SDM630 MCT V2 and SDM120CTMB and SDM120CTM. NOTE!, Buy three coils for three-phase electricity meters. Weight/ spool 1.6 kg Accuracy 1% Dimensions: See pictures

Price SEK 659.00
More
In Stock (3 pcs.)

Reference: 01-043

Electricity meter single phase DCM 230 modbus

(0)

Electricity meter single phase DCM 230 modbus NOTE! Supply voltage 9-40V DC Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1% Backlit...

Price SEK 719.00
More
In Stock (42 pcs.)

Reference: 01-080

Current transformers 250 A SCT024TS 250A/5A

(0)

Openable current coils 250A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. Or Carlo Gavazzi EM330-HM1 Inner diameter of the coil is 23 X 23 mm. External dimensions: Width 52 X Height 76 X Depth 42 mm 1 piece (Buy 3 pieces for...

Price SEK 199.00
More
In Stock (8 pcs.)

Reference: 01-059

Electricity meter single phase for coil M-bus

(0)

New 1-phase electricity meters SDM120CTMB M-bus MID Affordable electricity meter with both flashing diode and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Price SEK 365.00
More
In Stock (16 pcs.)

Reference: 26-026

Brand: Inepro

The Mobile Smart Meter INEPRO PRO-Flex CEE16

(0)

PRO-Flex Is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.

Price SEK 1,499.00
More
In Stock (52 pcs.)

Reference: 01-066

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-S1 3-fas Modbus meter MID

(1)

Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.

Price SEK 1,379.00
More
In Stock (125 pcs.)

Reference: 01-005

Brand: Eastron

SDM630 Modbus MCT V2 3-phase electricity meter (Non MID)

(0)

SDM630 Modbus MCT V2 3-phase energy meter. (Non MID) For use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger...

Price SEK 1,375.00
More
In stock (17 pcs.)
Comments (0)