Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (443 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (757 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (79 pcs.)
All best sellers
Eastron SDM630 Modbus MID V2 electricity meter, main image
  • Eastron SDM630 Modbus MID V2 electricity meter, main image
  • Eastron SDM630 Modbus MID V2 electricity meter, image from left.
  • Eastron SDM630 Modbus MID V2 electricity meter, image from right.
  • Eastron SDM630 Modbus MID V2 electricity meter, image from top.
  • Eastron SDM630 Modbus MID V2 electricity meter, terminals Connection drawing.
  • Eastron SDM630 Modbus MID V2 electricity meter, dimensions
  • Eastron SDM630 Modbus MID V2 electricity meter, Communications terminals.

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

01-004

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger.

MID certification makes it possible to use for billing purposes.

Volume discounts

Quantity Unit discount You Save
5 SEK 115.00 Up to SEK 575.00
SEK 1,327.00
Tax included
Quantity
In stock (343 in stock)

Description

SDM630 Modbus MID V2, 3-phase electricity meter

With Modbus RTU, pulse output suitable for logging.

Modular device for DIN rail 35mm, width: 4 modules (72.3 mm), the display shows Volts, Watts, Apmeres, Frequecy, Power factor and more.

MID certification makes it possible to use for billing purposes.

MANUAL SDM630 MODBUS NON MID

MODBUS PROTOCOL SDM630 MODBUS NON MID

Specifications

5.1 Measured Parameters

The unit can monitor and display three phase four wire (3p4w) supply.

5.1.1 Voltage and Current

Phase to neutral voltages 100 to 289V a.c.

Voltages between phases 173 to 500V a.c.

Percentage total voltage harmonic distortion (THD%) for each phase to N

Percentage voltage THD% between phases

Current THD% for each phase

Power factor and Frequency and Max. Demand

Frequency in Hz

Instantaneous power:

Power 0 to 99999 W

Reactive Power 0 to 99999 W

Volt-amps 0 to 99999 MVA

Maximum demanded power since last Demand reset Power factor

Maximum neutral demand current, since the last Demand reset (for three phase supplies only)

Energy Measurements

Imported active energy 0 to 999999.99 kWh

Exported active energy 0 to 999999.99 kWh

Imported reactive energy 0 to 999999.99 kVArh

Exported reactive energy 0 to 999999.99 kVArh

Total active energy 0 to 999999.99 kWh

Total reactive energy 0 to 999999.99 kVArh

Measured Inputs

Maximum terminal opening for power cables is 8 X 8 mm (MAX 25 mm2 cable).

Accuracy

Voltage 0·5% of range maximum

Current 0·5% of nominal

Frequency 0·2% of mid-frequency

Power factor 1% of unity (0.01)

Active power (W) ±1% of range maximum

Reactive power (VAr) ±1% of range maximum

Apparent power (VA) ±1% of range maximum

Active energy (Wh) Class 1 IEC 62053-21

Reactive energy (VARh) ±1% of range maximum

Total harmonic distortion 1% up to 31st harmonic

Temperature co-efficient Voltage and current = 0.013%/°C typical

Active energy = 0·018%/°C, typical

Response time to step input 1s, typical, to >99% of final reading, at 50 Hz.

Interfaces for External Monitoring

Three interfaces are provided:

an RS-485 communication channel that can be programmed for Modbus RTU protocol

an relay output indicating real-time measured energy.(configurable)

One fixed pulse output 400 Imp/kWh

The Modbus configuration (Baud rate etc.) and the pulse relay output assignments (kW/kVArh,

import/export etc.) are configured through the Set-up screens.

Pulse Relay Output

The pulse relay output can be set to generate pulses to represent kWh or kVArh.

Rate can be set to generate 1 pulse per:

0.01 = 10 Wh/VArh

0.1 = 100 Wh/VArh

1 = 1 kWh/kVArh

10 = 10 kWh/kVArh

100 = 100 kWh/kVArh

Pulse width 200/100/60 ms.

Relay Rating 240V ac 50mA

RS485 Output for Modbus RTU

For Modbus RTU, the following RS485 communication parameters can be configured from the

Set-up menu:

Baud rate 2400, 4800, ,9600, ,19200, 38400

Parity none/odd/even

Stop bits 1 or 2

RS485 network address nnn – 3-digit number, 1 to 247

Modbus™ Word order Hi/Lo byte order is set automatically to normal or reverse. It cannot

be configured from the set-up menu.

Reference Conditions of Influence Quantities

Influence Quantities are variables that affect measurement errors to a minor degree. Accuracy is

verified under nominal value (within the specified tolerance) of these conditions.

Ambient temperature 23°C ±2°C

Input waveform 50 or 60Hz ±2%

Input waveform Sinusoidal (distortion factor < 0·005)

Auxiliary supply voltage Nominal ±1%

Auxiliary supply frequency Nominal ±1%

Auxiliary supply waveform (if AC) Sinusoidal (distortion factor < 0·05)

Magnetic field of external origin Terrestrial flux

 

Environment

Operating temperature -25°C to +55°C*

Storage temperature -40°C to +70°C*

Relative humidity 0 to 90%, non-condensing

Altitude Up to 3000m

Warm up time 1 minute

Vibration 10Hz to 50Hz, IEC 60068-2-6, 2g

Shock 30g in 3 planes

*Maximum operating and storage temperatures are in the context of typical daily and seasonal

variation.

Mechanics

35 mm DIN rail dimensions 72,3 x 100 mm (WxH) per DIN 43880

Mounting DIN rail (DIN 43880)

Sealing IP51

Material Self-extinguishing UL 94 V-0

Volt, Amps, Power, Power factor and more

MID

2014/32/EU EC certifikat number 0120/SGS0151

Importer and distributor is Web Info Quality EU AB, owner of www.energibutiken.se.

Org. nr, 556787-3756

Product Details
01-004
01004
343 Items
Accessories

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

(0)

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Price SEK 1,099.00
In Stock (189 pcs.)
16 other products in the same category:

Reference: 01-023

Electricity meter single phase Eastron SDM230DR MID

(0)

Single-phase MID-certified electricity meter Eastron SDM230DR MID. Easy to use electricity meter with the extra twist! Fixed counter + resettable counter (tripmeter) + power display. The electricity meter has illuminated display, pulse output and is MID certified. The power measurement shows exactly how many watts currently consumed!

Price SEK 379.00
More
In Stock (193 pcs.)

Reference: 01-059

Electricity meter single phase for coil M-bus

(0)

New 1-phase electricity meters SDM120CTMB M-bus MID Affordable electricity meter with both flashing diode and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Price SEK 365.00
More
In Stock (16 pcs.)

Reference: 01-070

Brand: Carlo Gavazzi

Electricity meter 3-phase Carlo Gavazzi EM340-O1 MID with Pulse output

(2)

Carlo Gavazzi EM340, model: em340dinav23xo1pfb Three-phase energy meter with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in applications up to 65 A (direct connection), with dual tariff management availability. It can measure imported and exported energy or be programmed to...

Price SEK 1,199.00
More
In Stock (160 pcs.)

Reference: 26-025

Brand: Inepro

The Mobile Smart Meter INEPRO PRO-Flex Schuko

(0)

PRO-Flex  is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.

Price SEK 1,499.00
More
In Stock (66 pcs.)

Reference: 01-012

Brand: Energibutiken, WebIQ AB

Current transformers 200 A ESCT-B23 200A/5A

(0)

Split core Current transformer 200A / 5A Inner diameter for coils are 21 X 32 mm. Fits our three-phase electricity meter SDM630 MCT V2 and the single-phase meters SDM120D CTM and CTMB.Exterior dimensions: Width 87 X Height 105 X Depth 32 mm1 piece (Buy 3 pieces for a three-phase electricity meter)Accuracy 0.5%NOTE! Check cable dimensions. Compare with the...

Price SEK 122.40 Regular price SEK 204.00
More
In Stock (1 pcs.)

Reference: 01-077

Brand: Carlo Gavazzi

Electricity meter 3-phase Carlo Gavazzi EM330-HM1 M-bus for measuring with current coils

(0)

Electricity meter 3-phase Carlo Gavazzi EM330-HM1 M-bus for measuring with current coils Three-phase electricity meter with M-bus for measuring with current coils, model designation: EM330DINAV53HM1PFB for 3-phase (65A/400V). Approved for debit metering, used for net metering/production. Can be logged with Logger 1010 or Logger 3030 PRO Modbus, or with...

Price SEK 1,759.00
More
In Stock (26 pcs.)

Reference: 01-071

Current transformers 600 A SCT036TS 600A / 5A

(0)

Openable current coils 600A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. SCT036TS-600A-5A Inner diameter of the coil is 35 mm. External dimensions: W: 66mm X H: 94mm X D: 46mm 1 piece (buy 3 pieces for three-phase electricity...

Price SEK 259.00
More
In Stock (30 pcs.)

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

(2)

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Price SEK 1,395.00
More
In stock (300 pcs.)

Reference: 01-006

Brand: Eastron

Eastron SDM230 modbus MID Electricity meter single phase

(0)

Single phase MID certified electricity meter with Modbus and doubble pulse putput Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1%...

Price SEK 505.00
More
In Stock (96 pcs.)

Reference: 01-037

Split core current transformer ESCT-B88 800A/5A

(0)

Split core current transformer 800A / 5A, Top Quality! Inner diameter of the coil is 80 X 80 mm. Fits our electricity meters SDM630 MCT V2, SDM120CTM, SDM120CTMB External dimensions: 142 X 145 X 49 mm Weight / spool 1.135 kg Includes 1 pcs (Buy 3 pcs to three-phase electricity meters) Accuracy 0.5%

Price SEK 795.00
More
In Stock (3 pcs.)
Comments (0)