- Reduced price

Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
Inner diameter for coils are 21 X 32 mm. Fits our three-phase electricity meter SDM630 MCT V2 and the single-phase meters SDM120D CTM and CTMB.
Exterior dimensions: Width 87 X Height 105 X Depth 32 mm
1 piece (Buy 3 pieces for a three-phase electricity meter)
Accuracy 0.5%
NOTE! Check cable dimensions. Compare with the opening in the power coil.
Inner diameter for coils are 21 X 32 mm. Fits our three-phase electricity meter SDM630 MCT V2 and the single-phase meters SDM120D CTM and CTMB.
Exterior dimensions: Width 87 X Height 105 X Depth 32 mm
1 piece (Buy 3 pieces for a three-phase electricity meter)
Accuracy 0.5%
NOTE! Check cable dimensions. Compare with the opening in the power coil.
Reference: 01-074
Distribution box for 4 modules, white with a clear black front cover. . For safe installation of relays and / or electricity meters for DIN rail. W X H X D = 110 X 180 X 82 mm
Reference: 01-027
Brand: Inepro
INEPRO three phase electric meter PRO380 ModbusFor more detailed information on this meter, refer to the MANUAL.featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online
Reference: 26-029
The PRO-flex is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.
Reference: 01-076
Brand: Eastron
Eastron SDM230 LoRa WAN MID is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km. The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network. The device measures and displays properties of...
Reference: 01-058
Openable current coils 200A/5A The current coil fits the following electricity meters SDM630 MCT V2 MID, SDM630 MCT V2 non-MID, SDM120D CT-P, SDM120CTM MID, SDM120CTMB M-bus MID, SDM630 MCT M-bus V2 MID. Inner diameter of the coil is 23 X 23 mm. External dimensions: Width 52 X Height 76 X Depth 42 mm 1 piece (Buy 3 pieces for three-phase electricity...
Reference: 01-057
Distribution box for 2 modules, white. For safe installation of relays and or single-phase electricity meter. Fits our 2 module wide electricity meters.
Reference: 01-061
The SDM630MCT-Lora is a new generation three phase multi function energy meter with wireless communication Lora module built inside. with public Lora protocol, the user can easily build a wireless meter reading system.
Reference: 01-043
Electricity meter single phase DCM 230 modbus NOTE! Supply voltage 9-40V DC Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1% Backlit...
Reference: 01-031
Distribution box 8 modules Premium, white. For safe installation of electricity meters, relays, circuit breakers, earth leakage circuit breaker mm DIN rail.
Reference: 01-075
Brand: Eastron
Eastron SDM230 LoRa WAN (Non-MID) is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km. The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network. The device measures and displays properties of...
Reference: 26-025
Brand: Inepro
PRO-Flex is a practical and simple solution that allows you to measure the energy consumption of mobile energyusers / appliances. The PRO-flex can easily be carried to different locations, so there is no need to build a completeand costly infrastructure per location.
Reference: 01-070
Brand: Carlo Gavazzi
Carlo Gavazzi EM340, model: em340dinav23xo1pfb Three-phase energy meter with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in applications up to 65 A (direct connection), with dual tariff management availability. It can measure imported and exported energy or be programmed to...
Reference: 01-069
Brand: Carlo Gavazzi
Carlo Gavazzi EM111-O1 single-phase puls meter Single-phase energy analyzer with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in MID applications up to 45 A (direct connection)
Reference: 01-081
Brand: Inepro
INEPRO three phase electric meter PRO380 Modbus CTFor more detailed information on this meter, refer to the MANUAL. For cuccent coils with 1 or 5 A output. featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online
Reference: 01-073
Single phase electricity meter for currents up to 100 A, Carlo Gavazzi EM112-S1 Modbus MID, EM112DINAV01XS1PFB
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Inner diameter for coils are 21 X 32 mm. Fits our three-phase electricity meter SDM630 MCT V2 and the single-phase meters SDM120D CTM and CTMB.
Exterior dimensions: Width 87 X Height 105 X Depth 32 mm
1 piece (Buy 3 pieces for a three-phase electricity meter)
Accuracy 0.5%
NOTE! Check cable dimensions. Compare with the opening in the power coil.