Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €22.11
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price €0.71
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price €75.37
More
In Stock (443 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price €117.81
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price €0.53
More
In Stock (757 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price €149.06
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price €66.94
More
In Stock (79 pcs.)
All best sellers
Dallas 1-wire PRO temp sensor 1 meter
  • Dallas 1-wire PRO temp sensor 1 meter
  • Dallas 1-wire PRO temp sensor 5 meter
  • Dallas 1-wire PRO temp sensor 5 meter

Dallas 1-wire PRO temp sensor 1 meter BK

02-039

Sensor 1 meter X 6mm

Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020.

This type of temperature sensor are very accurate, calibrated in the factory.

1 meter cable, 3.5 mm diameter

Chip: Dallas DS18B20

€13.76
Tax included
Quantity
In stock (60 in stock)

Description

Dallas 1-wire PRO temp sensor 1 meter X 6 mm

Very affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially adapted to the Logger 2020.

This type of temperature sensor are very accurate, calibrated in the factory.

Connected the sensor to input 1 on the Logger 2020.

The sensors can be connected at any point in temp sensor network, see the product homepage.

This type of temperature sensor is very accurate, as seen in the graph below.

 dallas 1-wire PRO 6 mm ds18s20

 

Measuring range -55 ° C to +125 ° C (-67 ° F to +257 ° F)

± 0.5 ° C accuracy in the range -10 ° C to +85 ° C

Chip: Dallas DS18B20

It is possible to adjust the offset of the sensors (parallel shift of displayed value).
You can choose how often the sensors are to be read and how much filtering you want from the presented values.

Each sensor has a unique identity, name them in the PC software or web service to what you see fit.

Simply plug the sensor in the 2020 Logger's terminals 1,2 and 3 to get a separate power supply to the sensor, or connect them to 1-wire bus terminals 5 and 6 (as directed in the manual) to communicate in parallel with any modules, this in "parasit power" mode.

Product Details
02-039
02039
60 Items
Accessories

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price €10.21
More
In Stock (8 pcs.)

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price €14.12
More
In Stock (3 pcs.)

Reference: 02-036

Brand: Energibutiken, WebIQ AB

Compression fitting for temp sensors

(0)

Compression fitting for temp sensors Smooth compression fittings for mounting temperature probes with 6 mm sleeve (see picture). This compression fitting allows you, via a T-pipe coupling, to plug in your temp sensor directly in the flow of the liquid you are measuring the temperature of.

Price €14.12
More
In Stock (16 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price €12.34
More
In Stock (7 pcs.)
16 other products in the same category:

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price €14.12
More
In Stock (3 pcs.)

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

(1)

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Price €22.11
More
In Stock (44 pcs.)

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

(0)

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €29.21
More
In Stock (13 pcs.)

Reference: 02-007

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 2 meter

(0)

Tube surface Sensor Affordable 2 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €20.33
More
In Stock (8 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price €12.34
More
In Stock (7 pcs.)

Reference: 04-023

Heat conductive paste 20 grams

(0)

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price €8.79
More
In Stock (13 pcs.)

Reference: 02-038

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 2 meter

(0)

Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Price €15.89
More
In stock (127 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price €4.17
More
Out-of-Stock

Reference: 02-005

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 15 meter

(0)

Sensor 15 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 15 meter black silicon cable Chip: Dallas DS18B20

Price €26.54
More
In stock (41 pcs.)

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price €10.21
More
In Stock (8 pcs.)

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

(0)

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Price €22.11
More
In stock (31 pcs.)

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

(0)

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Price €22.11
More
In Stock (118 pcs.)
Comments (0)