LOGGER ACCESSORIES

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 01-070

Brand: Carlo Gavazzi

Electricity meter 3-phase Carlo Gavazzi EM340-O1 MID with Pulse output

Carlo Gavazzi EM340, model: em340dinav23xo1pfb Three-phase energy meter with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in applications up to 65 A (direct connection), with dual tariff management availability. It can measure imported and exported energy or be programmed to...

Reference: 12-009

Brand: Itron

Connection Kit DN20

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 13-005

Connection Kit DN15

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Reference: 02-001

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO indoor sensor

Indoor Sensor 3-wire Dallas DS18B20 temperature sensor suitable for a Logger 2020's 1-wire input (Terminals 1,2,3).Nice nested inside sensor/room sensor from which to measure the temperature in your house, garage or similar place, measuring range -35 to +85°C.

Reference: 01-005

Brand: Eastron

SDM630 Modbus MCT V2 3-phase electricity meter (Non MID)

SDM630 Modbus MCT V2 3-phase energy meter. (Non MID) For use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger...

Reference: 13-002

Brand: Energibutiken, WebIQ AB

Flow meter Qn 2.5, with Pulse Output.

Flow meter Qn 2.5, with Pulse output Flow meter with pulse module for measuring flow in the range 30-5000 l/h with an accuracy better than +-2%

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Reference: 01-066

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-S1 3-fas Modbus meter MID

Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.

Reference: 13-006

Brand: Itron

Flow meter Qn 2.5

Flow meter Qn 2.5. Water meter Qn 2.5 cold water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical mounting.

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Reference: 01-027

Brand: Inepro

INEPRO three phase electric meter PRO380 Modbus

INEPRO three phase electric meter PRO380 ModbusFor more detailed information on this meter, refer to the MANUAL.featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online

Reference: 13-007

Brand: Itron

Flow meter Qn 2.5 hot water

Flow meter Qn 2.5. Water meter Qn 2.5 hot water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical...

Reference: 02-013

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 1 meter

PT1000 3-wire sensor, max 200°C, 1 meter 6 X 50 mm 3-wire universal temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Can replace Danfoss ESMB-12

Reference: 01-007

Brand: Energibutiken, WebIQ AB

SDM630 M-bus MID 3-phase electricity meter

SDM630 Mbus MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, Mbus RTU communication available suitable for our Logger 1010 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 13-009

Brand: Itron

Cyble M-bus module

Cyble M-bus module for Unimag Cyble water meter An M-bus module for Unimag Cybel water meter for use in remote reading systems (AMR) or in datalogging of flow and / or volume in other contexts, such as In tap water systems or heating systems.

Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Reference: 01-029

Brand: Eastron

Eastron SDM630 MCT M-bus V2 MID 3-phase electricity meter

SDM630 MCT M-bus V2 MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, M-bus communication available suitable for our Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 13-008

Brand: Itron

Puls module Cyble sensor 2W

Cyble Sensor pulse module with 1 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Reference: 02-023

Brand: Energibutiken, WebIQ AB

PT100 outdoor temp sensor

PT100 Outdoor temp sensor Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ Suitable for outdoor measurements in the temperature range -50°C ... +90°C. Can replace sensors used in PT100-based building automation systems

Reference: 01-065

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-M1 3-phase M-bus meter MID

Reference: 13-011

Puls module Cyble sensor 2W K10

Cyble Sensor pulse module with 10 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Reference: 02-024

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 1 meter

PT100 sensor, max 200°C, 1 meter6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.