Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (361 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (333 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (247 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (695 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (49 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (21 pcs.)
All best sellers

There are 52 products.

Showing 1-28 of 52 item(s)
Active filters
  • Categories: HEAT METERS
  • Categories: MEASURING TRANSDUCERS
  • Categories: MODBUS PRODUCTS
  • Categories: VIBRATION DAMPERS

Reference: 15-015

Vibration damper Premium

(0)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (212 pcs.)

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

(0)

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Price SEK 1,099.00
In Stock (180 pcs.)

Reference: 12-015

Itron CF ECHO II Qp 0.6 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,595.00
More
In Stock (1 pcs.)

Reference: 06-001

Brand: Energibutiken, WebIQ AB

PT1000 TRANSDUCER to 0-10 volt

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (6 pcs.)

Reference: 15-016

Vibration damper Premium

(1)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 499.00
More
In Stock (104 pcs.)

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (8 pcs.)

Reference: 12-001

Itron CF ECHO II Qp 1.5 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,651.00
More
In Stock (6 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (247 pcs.)

Reference: 01-090

3-fas elmätare Eastron SDM54-M Modbus MID

(0)

3-phase electricity meter Eastron SDM54-M A small and handy electricity meter, 3 modules wide, with Modbus, CE approved and MID certified making it suitable as a billing meter. Three phase 100A direct feed MID B+D certified Class B accuracy (1%) Bidirectional measurement for active energy and power Configurable pulsed output (import/export and Net kWh)...

Price SEK 1,379.00
More
In Stock (10 pcs.)

Reference: 12-002

Itron CF ECHO II Qp 2.5 heat meter

(0)

Itron CF ECHO II Qp 2.5 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 2,599.00
More
In Stock (3 pcs.)

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price SEK 69.00
More
In Stock (39 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (21 pcs.)

Reference: 01-066

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-S1 3-fas Modbus meter MID

(1)

Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.

Price SEK 1,379.00
More
In Stock (26 pcs.)

Reference: 15-005

Vibration damper Premium Plus

(0)

Vibration Damper Premium + "Stiff" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This + kit has a bit stiffer springs than our "soft" package, especially designed for those who mount in wind exposed areas, eg. in the mountains or by the sea where there are often harsh winds.

Price SEK 869.00
More
In Stock (58 pcs.)

Reference: 15-006

Vibration damper Air to Water

(2)

Steel Spring Isolators. High-quality galvanized steel spring isolators that beats most when it comes to anti-vibration of Air to Water heat pumps, weight of the heat pump can be 100 - 200 kg. Be aware that these dampers are higher than most rubber dampers if you are to replace already fitted rubber dampers.

Price SEK 869.00
More
In Stock (45 pcs.)

Reference: 01-081

Brand: Inepro

INEPRO PRO380 Modbus - CT

(0)

INEPRO three phase electric meter PRO380 Modbus CTFor more detailed information on this meter, refer to the MANUAL. For cuccent coils with 1 or 5 A output. featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online

Price SEK 2,399.00
More
In Stock (3 pcs.)

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 99.00
More
In Stock (22 pcs.)

Reference: 15-002

Brand: Energibutiken, WebIQ AB

Vibration dampers with washers and nuts

(0)

Vibration dampers with washers and nuts Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.

Price SEK 199.00
More
In Stock (10 pcs.)

Reference: 01-027

Brand: Inepro

INEPRO three phase electric meter PRO380 Modbus

(1)

INEPRO three phase electric meter PRO380 ModbusFor more detailed information on this meter, refer to the MANUAL.featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online

Price SEK 2,399.00
More
In Stock (14 pcs.)

Reference: 15-004

Brand: Energibutiken, WebIQ AB

Sylodyn vibration dampers for heat pumps

(2)

Sylodyn vibration dampers for heat pumps Sylodyn are used with good results as vibration absorbers to heat pumps to reduce structure-borne sound in the house's design due to the vibrations of the compressor and circulating pumps can cause. (Refers to exhaust air, geotermal and ground source heat pumps - not air/air heat pumps)

Price SEK 799.00
More
In Stock (19 pcs.)

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

(2)

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Price SEK 375.00
More
in stock (10 pcs.)

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

(2)

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Price SEK 1,395.00
More
In stock (259 pcs.)

Reference: 01-078

Brand: Carlo Gavazzi

Electricity meter 3-phase Carlo Gavazzi EM330-HS1 Modbus for measuring with current coils

(0)

Electricity meter 3-phase Carlo Gavazzi EM330-HS1 Modbus for measuring with current coils Three-phase electricity meter with Modbus for measuring with current coils, model designation: EM330DINAV53HS1PFB for 3-phase (65A/400V). Approved for debit metering, used for net metering/production. Can be logged with Logger 1010 Modbus.

Price SEK 1,894.00
More
In Stock (25 pcs.)

Reference: 12-011

Brand: Itron

230 V power supply for heat meter CF-Echo II

(0)

230 V power supply for CF-Echo II When logging energy, power, flow, temperature and volume using Logger 3030 PRO and Itron CF-Echo II, you might need to replace the battery module that CF-Echo II is equipped with as standard.

Price SEK 445.00
More
In Stock (10 pcs.)