Vibration Dampers WebIQ Powder Coated "Soft"
For vibration damping of air/air heat pumps.
Contains 2 x WebIQ Powder Coated hardness 3 and 2 x WebIQ Powder Coated hardness 5.
Do you have problems with low-frequency vibrations in the wall? Often, it is because the compressor or fan in the outdoor unit, under certain conditions and/or speeds, creates a vibration that propagates through the wall mount and into the wall. The sound can resemble that of a truck idling.
With our vibration dampers, problems are usually completely eliminated, or to the greatest extent possible.
This type of steel spring damper has some differences compared to our "premium" model. To enable you to make an informed choice, we have created a table that outlines the properties of the individual springs.
| Vibration Damper |
Load |
Height |
Compression ± 2.0 mm |
Diameter |
Spring Diameter |
Proven |
| Premium 3 |
4–12 kg |
58 mm |
18.33 mm |
52 mm |
3.1 mm |
Yes >13 years |
| Premium+ 4 |
7–18 kg |
58 mm |
22.48 mm |
52 mm |
3.9 mm |
Yes >13 years |
| Premium 5 |
12–29 kg |
58 mm |
18.16 mm |
52 mm |
4 mm |
Yes >13 years |
| Premium+ 6 |
18–44 kg |
58 mm |
20.60 mm |
52 mm |
4.1 mm |
Yes >13 years |
| WebIQ 3 |
4–12 kg |
58 mm |
25 mm |
59 mm |
3.5 mm |
Yes >7 years |
| WebIQ+ 4 |
7–18 kg |
58 mm |
25 mm |
59 mm |
3.6 mm |
Yes >7 years |
| WebIQ 5 |
12–29 kg |
58 mm |
25 mm |
59 mm |
4.3 mm |
Yes >7 years |
| WebIQ+ 6 |
18–44 kg |
58 mm |
25 mm |
59 mm |
4.5 mm |
Yes >7 years |
| WebIQ 3 black |
4–12 kg |
58 mm |
25 mm |
59 mm |
3.4 mm |
New! |
| WebIQ+ 4 black |
7–18 kg |
58 mm |
25 mm |
59 mm |
3.5 mm |
New! |
| WebIQ 5 black |
12–29 kg |
58 mm |
25 mm |
59 mm |
4.3 mm |
New! |
| WebIQ+ 6 black |
18–44 kg |
58 mm |
25 mm |
59 mm |
4.5 mm |
New! |
A kit for you who wants to reduce vibrations from air heat pump - Developed and assembled to in the best possible way be able to dampen vibrations from air heat pumps.
This "soft" kit has slightly softer springs than our WebIQ+ package, specially designed for those who mount in places that are well protected from strong winds.
Our soft package has hardness 5/3 compared to the hard package which has hardness 6/4.
Different hardness springs on the compressor side and "evaporator side" ensure that the heat pump stands level. This reduces the risk of water running under the compressor and freezing into ice, which can cause vibrations when the compressor's own dampers stop working due to the ice.
We also include 6 extra washers that can be used to adjust the springs if the machine does not end up exactly level, depending on individual weight differences between different brands and models on the market.
We dare to say that our vibration damper packages are the best and most adapted on the Swedish market. The springs included in the package are excellent vibration dampers made of galvanized steel, and the springs are attached to the washers with a two-component adhesive. This type of vibration damper is not affected by temperature or age and retains its unique properties over time. A no-compromise vibration damper for you who do not want to take chances.
This kit includes:
- 2 vibration dampers with hardness 3
- 2 vibration dampers with hardness 5
- 14 washers, 8.3 x 24 mm
- 8 bolts, M8 x 25 mm
Weight information:
- Softer springs: Optimized for approximately 4–12 kg load on the "lighter side" and to be mounted on the side of the heat pump where the compressor is not located.
- Harder springs: Optimized for approximately 12–29 kg on the compressor side, which bears the higher weight from the compressor.
Important to consider:
If you are planning to replace your rubber dampers, please note that these dampers are higher than most rubber dampers. You must be able to lift the outdoor unit approximately 2 cm extra without damaging the pipes.
