Reference: 26-028

Brand: Energibutiken, WebIQ AB

Adapter CEE16 female to Schuko male

Adapter CEE16 male to Schuko female Is an advisor to be able to connect eg. our mobile electric meter with CEE16 connectors to a consumer with "regular contact". (Schuko) 0.4 m cable length, Max 16A

Reference: 15-005

Vibration damper Premium Plus

Vibration Damper Premium + "Stiff" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This + kit has a bit stiffer springs than our "soft" package, especially designed for those who mount in wind exposed areas, eg. in the mountains or by the sea where there are often harsh winds.

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 07-005

Brand: Energibutiken, WebIQ AB

CO2, temperatur och fuktmonitor med alarm

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 01-066

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-S1 3-fas Modbus meter MID

Electricity meter 3-phase Carlo Gavazzi EM340-S1 Electricity meter EM340DINAV23XS1PFB for 3-phase (65A / 400V) with Modbus (RS485). Approved for billing measurement, used for net measurement / production. Small size, easy configuration.

Reference: 15-006

Vibration damper Air to Water

Steel Spring Isolators. High-quality galvanized steel spring isolators that beats most when it comes to anti-vibration of Air to Water heat pumps, weight of the heat pump can be 100 - 200 kg. Be aware that these dampers are higher than most rubber dampers if you are to replace already fitted rubber dampers.

Reference: 02-039

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 1 meter BK

Sensor 1 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 1 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Reference: 20-006

Brand: Energibutiken, WebIQ AB

Wireless Wide Angle Ceiling PIR Movement Sensor

Wireless Wide Angle Ceiling PIR Movement Sensor 360° 8 meter range, a sensor that can replace 2 or more wall mount sensors.

Reference: 15-016

Vibration damper Premium

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Reference: 01-007

Brand: Energibutiken, WebIQ AB

SDM630 M-bus MID 3-phase electricity meter

SDM630 Mbus MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, Mbus RTU communication available suitable for our Logger 1010 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 07-007

Brand: Energibutiken, WebIQ AB

Temperature/Humidity/CO2 transmitter modbus

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. No LCD-display

Reference: 20-011

Brand: Energibutiken, WebIQ AB

Wired door/window magnetic sensor

Wired magnetic sensor that fits Energibutikens all alarm systems.

Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 01-065

Brand: Carlo Gavazzi

Carlo Gavazzi EM340-M1 3-phase M-bus meter MID

Reference: 04-020

Brand: Daikin

WiFI modul Daikin Solo BRP069B45

Daikin BRP069B45 WIFI module The perfect accessory for your Daikin air source heat pump with this unit enables control and reading of the air source heat pump via an easy-to-use app. Note! this unit fits Daikin Solo and sensira models such as FTXTP25 and FTXTP35

Reference: 04-017

Modul Modbus med 8 Digitala ingångar & utgångar

Module Modbus with 8 Digital inputs & outputs 8 channels of digital inputs and outputs that are insulated with electronic optics. (NPN) Can be used with RS485 MODBUS RTU communication standard. Can be combined with industrial configuration software, PLC and touchpad. Communication status LED, input and output. Works for Logger 3030 PRO Mobus.

Reference: 20-010

Brand: Energibutiken, WebIQ AB

Wireless vibration sensor

Wireless vibration sensor, great value!

Reference: 13-006

Brand: Itron

Flow meter Qn 2.5

Flow meter Qn 2.5. Water meter Qn 2.5 cold water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical mounting.

Reference: 15-004

Brand: Energibutiken, WebIQ AB

Sylodyn vibration dampers for heat pumps

Sylodyn vibration dampers for heat pumps Sylodyn are used with good results as vibration absorbers to heat pumps to reduce structure-borne sound in the house's design due to the vibrations of the compressor and circulating pumps can cause. (Refers to exhaust air, geotermal and ground source heat pumps - not air/air heat pumps)

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Reference: 25-034

Elcentral 13 Moduler

Distribution Box 13 Modules A distribution box for you who are constucting new buldings och renovating old buildings. The distribution box is suitable for: Garage 'Storehouse Workshop Holiday home Cottages Sheds Warehouses Machine halls,

Reference: 04-018

Modbus module with 6 analog inputs

Modbus module with 6 analog inputs, 4 digital inputs, and 4 digital outputs. Wellpro 9038 ADAM 6 channels of analog input (0-20mA / 4-20mA DC), with 12-bit resolution. Optoelectrically isolated inputs and outputs, 4 digital inputs + 4 digital outputs (NPN transistor open collector output). Uses RS485 MODBUS RTU communication. Compatible with Logger 3030...

Reference: 03-011

Power supply 24 VDC / 0.5 A

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Reference: 13-007

Brand: Itron

Flow meter Qn 2.5 hot water

Flow meter Qn 2.5. Water meter Qn 2.5 hot water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical...

Reference: 02-004

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 10 meter

Sensor 10 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 10 meter black silicon cable Chip: Dallas DS18B20

Reference: 20-012

Brand: Energibutiken, WebIQ AB

Wired glass break sensor

Wired glass break sensor

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.