Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (430 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(14)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (71 pcs.)
All best sellers

There are 44 products.

Showing 1-28 of 44 item(s)
Active filters
  • Categories: DATALOGGER
  • Categories: PT1000 SENSORS

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price SEK 249.00
More
In Stock (74 pcs.)

Reference: 03-015

Brand: Energibutiken, WebIQ AB

Logger 1010

(0)

Logger 1010 'Logger 1010 is a powerful logger / control unit with a focus on being maximally flexible and easy to use. Support for a plethora of sensors, logging locally and remotely, and alarm possibilities via SMS and e-mail, make the areas of use almost endless.

Price SEK 1,099.00
In Stock (188 pcs.)

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

(0)

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Price SEK 249.00
More
In Stock (157 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price SEK 199.00
More
In Stock (18 pcs.)

Reference: 23-001

Power supply 12 VDC / 2.1 A

(0)

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Price SEK 295.00
More
In Stock (2 pcs.)

Reference: 03-012

Brand: Energibutiken, WebIQ AB

Extern onewire 4x20 oled-display

(0)

External onewire 4x20 oled display NOTE: Yellow characters. External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast. The display has controls US2066 and can also be used with Rasberiy PI,...

Price SEK 599.00
More
In Stock (10 pcs.)

Reference: 03-033

Power Supply for Logger 1010 & 3030

(0)

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Price SEK 99.00
More
In stock (96 pcs.)

Reference: 03-032

Power Supply for Logger 1010 & 3030

(0)

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Price SEK 109.00
More
In stock (90 pcs.)

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

(0)

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Price SEK 395.00
More
In Stock (18 pcs.)

Reference: 06-001

Brand: Energibutiken, WebIQ AB

PT1000 TRANSDUCER to 0-10 volt

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 799.00
More
In Stock (6 pcs.)

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 799.00
More
In Stock (4 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price SEK 139.00
More
In Stock (7 pcs.)