Ontech 9060 (4G)
The Ontech GSM 9060 is a product designed for indoor use and has a 230V output that you can control remotely via the mobile network (4G).
It also has two alarm inputs for wired alarms, functions such as temperature alarm and power failure alarm and thermostat.
It is easily controlled via Ontech Control in a web browser or via SMS.
Heating
- Connect a radiator (electric element or fan heater) to the Ontech 9060 to control the heat in the room.
- Connect up to seven Ontech Relay 9015 wireless auxiliary units and control the heat individually in many rooms.
- Connect Ontech 9060 to control a contactor in the electrical centre and control the heat in the entire cottage.
- Use the thermostat function to automatically keep the heat at a certain level in the rooms or the entire cottage.
- With the Ontech IR 9016 accessory, you move the air source heat pump remote control to your phone/tablet/computer.
Other use
- - All types of electrical control up to 230 V/16 A can be connected to the 230V output, this can be servers, routers, pumps, ventilation, motors, etc.
- The 230V output can be set with a timer function so that it switches on or off after a set time.
Alarms
- Connect different types of alarm sensors to the two alarm inputs in Ontech 9060.
- The alarm inputs can be set to alarm when the circuit is closed or open.
- All alarm sensors with relay output can be connected, e.g. motion detectors (PIR), fire alarms, magnetic switches, level switches, treadmills, etc.
- Alarm sensors that give or break voltage 3-30 V in case of alarm can also be connected.
- Optional alarm input can be set with delay.
Temperature
- Ontech 9060 reports the current temperature, in the Ontech Control panel this is automatically updated all the time so you always see the current temperature.
- An external temperature sensor with a 2 metre cable (can be extended) can be connected and then the temperature is reported both for the internal temperature sensor and for the external one.
- Temperature alarms can be set to alert when the temperature falls below and/or exceeds the alarm limits set by the users.
Operation
- The unit is controlled via the Ontech Control web panel, this is by far the easiest and most convenient way to control and communicate with Ontech 9060.
More information.
SIM card for this is included and the first month is free. An alternative is to control the device via SMS. A SIM card is then needed.
With apps for Android and iPhone (Shortcut to homepage for iphone), use can be simplified for SMS control.
Power monitoring and battery backup
Ontech 9060 has a built-in backup battery that is enough to keep the device alive for 10-20 hours. Useful when the device is used as an alarm. The device will alert (SMS) all names on the alarm list when a power outage occurs and notify when power is restored.
Specifications
- Mobile networks: 4G: eMTC 3/7/8/20, NB-loT :3/7/8/20, antenna connector SMA female also works with 2G: 900/1800 MHz
- SIM card: Mini-SIM (included for Ontech Control, free for the first 30 days)
- Temperature range: -40 to +55 degrees Celsius. The backup battery charges between +5 and +35 degrees C and can power the device between -5 and +40 degrees C.
- Power consumption: Nominal <0.5W, maximum 4 W.
- Backup battery: Built-in backup battery 4.2 V Lithium Polymer, 1100 mAh. Operates the unit approx. 10-20 hours
- 230V output: 230V/16A
- Alarm inputs (digital inputs) : 2 pcs, 3-30 VDC can be set Normally Open or Normally Closed
- Input for IR device: Input to connect Ontech IR 9016 to remotely control air heat pumps (not included, ordered separately)
- Mini-USB connector: For updating the software from Mac or PC. USB cable included.
- Internal temperature sensor: +/- 2 degrees at 25 degrees C and 230V output not activated
- Input for external temperature sensor: Accessory External Temperature Sensor can be connected
- Short range radio: 2.4 GHz. Output power 1 mW
- Weight: 230 grams
- Dimensions:(protruding part) 135x73x35 mm
- Approval: Meets all EU approval requirements and is CE marked
