Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €22.11
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price €0.71
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price €75.37
More
In Stock (443 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price €117.81
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price €0.53
More
In Stock (757 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price €149.06
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price €66.94
More
In Stock (79 pcs.)
All best sellers
PT1000 tube surface sensor, 5 meter
  • PT1000 tube surface sensor, 5 meter
  • PT1000 tube surface sensor, 5 meter
  • PT1000 tube surface sensor, 5 meter
  • Dallas 1-wire PRO tube surface sensor

PT1000 tube surface sensor, 10 meter, 3-wire

02-019

PT1000 tube surface sensor 10 meter

3-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. 

Can replace Danfoss ESMC

Volume discounts

Quantity Unit discount You Save
5 5% Up to €6.33
10 10% Up to €25.30
15 15% Up to €56.93
€25.30
Tax included
Quantity
In Stock (58 in stock)

Description

PT1000 tube surface sensor for up to 200°C, 10 meters of cable

Very affordable 3-wire PT1000 tube sensors with 10 meters of cable with sensor encapsulated in a prism-cut aluminum housing, with extra high protection rating IP68 (waterproof).

Can replace Danfoss ESMC

As an accessory to this sensor is a hose clip for mounting the sensor on the outside of tubes whose diameter can be 10-100 mm, see "Accessories" tab above.

Used with Loggermodulen HTMIQ or in any application that uses the standard PT1000 sensors. (does not connect directly to the Logger 2020's inputs, requires HTMIQ)

  • Measuring range -50 ° C to + 200 ° C
  • Protection: IP68 (waterproof)
  • Cable 10m
  • 3-wire cable (white - red- red)

Quantity discounts when purchasing multiple sensors.

Product Details
02-019
02019
58 Items
Accessories
16 other products in the same category:

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price €12.34
More
In Stock (7 pcs.)

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

(0)

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Price €35.07
More
In Stock (20 pcs.)

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price €22.11
More
In Stock (78 pcs.)

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price €10.21
More
In Stock (8 pcs.)

Reference: 07-010

Temp pocket for ventilation

(0)

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Price €2.57
More
In Stock (7 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price €4.17
More
Out-of-Stock

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

(0)

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Price €22.11
More
In Stock (158 pcs.)

Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

(0)

PT1000 High temp sensor -50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Price €31.96
More
In Stock (41 pcs.)
Comments (0)