Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

PT1000 High temp sensor -50 to +200°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Reference: 03-033

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Reference: 03-032

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 03-036

Black casing for 1-wire OLED display NHD-0420CW-AW3

Black casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 02-033

Brand: Energibutiken, WebIQ AB

Hose clamp

Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.

Reference: 02-009

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 10 meter

Tube surface Sensor Affordable 10 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 03-011

Power supply 24 VDC / 0.5 A

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Reference: 02-045

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

PT1000 High temp sensor -50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 22-001

250 OHM Resistor

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...