LOGGER ACCESSORIES

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Reference: 01-061

SDM630MCT-Lora MID

The SDM630MCT-Lora is a new generation three phase multi function energy meter with wireless communication Lora module built inside. with public Lora protocol, the user can easily build a wireless meter reading system.

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Reference: 01-005

Brand: Eastron

SDM630 Modbus MCT V2 3-phase electricity meter (Non MID)

SDM630 Modbus MCT V2 3-phase energy meter. (Non MID) For use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger...

Reference: 01-007

Brand: Energibutiken, WebIQ AB

SDM630 M-bus MID 3-phase electricity meter

SDM630 Mbus MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, Mbus RTU communication available suitable for our Logger 1010 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 01-055

Brand: Qubino

Qubino single phase Z-wave

Qubino single phase Z-Wave Electricity Meter Qubino 1-phase Smart Meter is an extremely versatile and powerful Z-Wave unit for measuring in a single-phase mains up to 65A.

Reference: 03-013

Power supply 12V, 1.25A, 15W HDR-15-12

Power supply 12V, 1.25A, 15W H Switched power supply 12V 1.25A 15W for DIN rail. The unit has adjustable output voltage 11V to 13V and handels voltage 100V to 240V. The unit has a working temperature of -30°C to + 70°C. This type of power supply has a low idle consumption.

Reference: 04-015

Kopplingsplint 2.5 mm2 12-polig

Reference: 04-014

Kopplingsplint 2.5 mm2 12-polig

Terminal block 2.5 mm2 12-pin With cable protection, made of nylon.

Reference: 04-008

Brand: Energibutiken, WebIQ AB

Junction Box

Junction Box Junction box, with five-pole terminal block. To connect the temperature sensors and electricity sensors cables to Logger 2020.

Reference: 01-027

Brand: Inepro

INEPRO three phase electric meter PRO380 Modbus

INEPRO three phase electric meter PRO380 ModbusFor more detailed information on this meter, refer to the MANUAL.featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online

Reference: 01-081

Brand: Inepro

INEPRO PRO380 Modbus - CT

INEPRO three phase electric meter PRO380 Modbus CTFor more detailed information on this meter, refer to the MANUAL. For cuccent coils with 1 or 5 A output. featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online

Reference: 01-028

Brand: Inepro

INEPRO PRO380 M-bus trefas elmätare

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 04-011

Brand: Energibutiken, WebIQ AB

Ethernet cable

Ethernet cable Unshielded cabling consisting of a 4-pair cable, Category 5e (Cat 5e), and an RJ45 connector on both ends. This cable are needed to connect Logger 2020 to your router if you want to run your Logger 2020 against the web service e-logger.se - or if you need to update the software in your Logger 2020.Select cable length before adding to cart.

Reference: 01-056

Brand: Qubino

Elmätare 3-fas Z-wave ZMNHXD1

Qubino 3-phase Z-Wave Electricity Meter Qubino 3-phase Smart Meter is an extremely versatile and powerful Z-Wave unit for suitable to three-phase conections up to 3 x 65A.

Reference: 01-079

Brand: Eastron

Elmätare 3-fas Eastron SDM530MCT-LoRa WAN MID

Reference: 01-060

Electricity meter single phase for coil Modbus

Affordable electricity meter with Modbus port and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Reference: 01-059

Electricity meter single phase for coil M-bus

New 1-phase electricity meters SDM120CTMB M-bus MID Affordable electricity meter with both flashing diode and 2 pcs of pulse output with 1000 imp / kWh, import and export. One module wide, for current coil measurment, order coils separate.

Reference: 01-034

Electricity meter single phase for camping sites

New 1-phase electricity meters for DIN rail Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide, for camping sites, hambours and so on. No decimals in counter.

Reference: 01-023

Electricity meter single phase Eastron SDM230DR MID

Single-phase MID-certified electricity meter Eastron SDM230DR MID. Easy to use electricity meter with the extra twist! Fixed counter + resettable counter (tripmeter) + power display. The electricity meter has illuminated display, pulse output and is MID certified. The power measurement shows exactly how many watts currently consumed!

Reference: 01-043

Electricity meter single phase DCM 230 modbus

Electricity meter single phase DCM 230 modbus NOTE! Supply voltage 9-40V DC Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1% Backlit...

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 01-042

Electricity meter Eastron DCM230 Modbus

Electricity meter Eastron DCM230 Modbus ATTENTION! Supply voltage 230V AC Very advanced electricity meter that has a counter, trip meter (which can be reset), power meter and much more (click "MORE" for full specifications). The electricity meter has an illuminated display, pulse output and connection for modbus RTU communication. Error display less than...