Reference: 02-026

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 10 meter

PT100 sensor, max 200°C, 10 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-030

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 3 meter cable

PT100 tube surface sensor, 3 meter Sensor, affordable PT100B temperature sensor, 3 meter cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Note this model cannot be connected to the Logger 3030.  

Reference: 02-031

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 10 meter cable

PT100 tube surface sensor, 10 meter Sensor, affordable PT100B temperature sensor, 10 meter 3-wire cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Note this model cannot be connected to the Logger 3030.  

Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Reference: 02-023

Brand: Energibutiken, WebIQ AB

PT100 outdoor temp sensor

PT100 Outdoor temp sensor Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ Suitable for outdoor measurements in the temperature range -50°C ... +90°C. Can replace sensors used in PT100-based building automation systems

Reference: 02-028

Brand: Energibutiken, WebIQ AB

PT100 high temp sensor 6 mm 400°C 3-wire, 3 meter

PT100 High temp sensor -50 to +400°C 2-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. Note this model cannot be connected to the Logger 3030.

Reference: 05-001

Brand: Energibutiken, WebIQ AB

Pressure Sensor 0-6 Bar

LONN-2SX Pressure transmitter 0-6 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 05-003

Pressure Sensor 0-2 Bar

LONN-2SX Pressure transmitter 0-2 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 05-002

Brand: Energibutiken, WebIQ AB

Pressure Sensor 0-10 Bar

LONN-2SX Pressure transmitter 0-10 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 03-032

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 03-033

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 03-011

Power supply 24 VDC / 0.5 A

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Reference: 23-001

Power supply 12 VDC / 2.1 A

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Reference: 04-016

Modul Modbus med 8 analoga ingångar

Modbus module with 8 analog inputs 8 channels of analog type: 0-20mA / 4-20mA DC, with 12bit AD chip With RS485 MODBUS RTU. Can be combined with industrial configuration software, PLC and touchpad Communication circuit is thunderstorm and interference protected. Works for Logger 3030 PRO Mobus.

Reference: 02-063

Modbus/PT1000 modul + 4 Digitala in.

Reference: 09-004

Brand: Energibutiken, WebIQ AB

Miljömodul

Environmental module Can be connected to two of our loggers, Logger 1010 or Logger 3030. Up to nine different environmental measurements!

Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 04-008

Brand: Energibutiken, WebIQ AB

Junction Box

Junction Box Junction box, with five-pole terminal block. To connect the temperature sensors and electricity sensors cables to Logger 2020.

Reference: 18-001

Brand: Energibutiken, WebIQ AB

IR-thermometer

Measuring range -50 ° C - + 380 ° C Fever thermometer? Read more under "More info". My personal favorite after testing almost 10 different IR thermometers! IR Thermometer Adjustable emissivity Adjustable + - 4.5 ° C Battery included.

Reference: 04-002

Brand: Energibutiken, WebIQ AB

HTMIQ High temp module

HTMIQ High temp module for Logger 2020 and SunLogger 2020 With this module, you can measure temparatures in the range above 125°C (up to 400°C)

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 04-023

Heat conductive paste 20 grams

Heat conductive paste 20 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 13-002

Brand: Energibutiken, WebIQ AB

Flow meter Qn 2.5, with Pulse Output.

Flow meter Qn 2.5, with Pulse output Flow meter with pulse module for measuring flow in the range 30-5000 l/h with an accuracy better than +-2%

Reference: 03-012

Brand: Energibutiken, WebIQ AB

Extern onewire 4x20 oled-display

External onewire 4x20 oled display NOTE: Yellow characters. External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast. The display has controls US2066 and can also be used with Rasberiy PI,...

Reference: 04-011

Brand: Energibutiken, WebIQ AB

Ethernet cable

Ethernet cable Unshielded cabling consisting of a 4-pair cable, Category 5e (Cat 5e), and an RJ45 connector on both ends. This cable are needed to connect Logger 2020 to your router if you want to run your Logger 2020 against the web service e-logger.se - or if you need to update the software in your Logger 2020.Select cable length before adding to cart.

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 04-005

Brand: Energibutiken, WebIQ AB

Electricity meter sensor

Electricity meter sensor Sensor reads flashing from IR or UV diodes, particularly for use with the Logger 2020. Simply attach these sensor via 2-lead wire to Logger 2020:s E1 or E2 terminals in order to monitor energy and power consumtion.

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.