Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €22.11
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price €0.71
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price €75.37
More
In Stock (443 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price €117.81
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price €0.53
More
In Stock (757 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price €149.06
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price €66.94
More
In Stock (79 pcs.)
All best sellers
  • Out-of-Stock
Temperature/Humidity/CO2 transmitter modbus
  • Temperature/Humidity/CO2 transmitter modbus
  • Temperature/Humidity/CO2 transmitter modbus
  • Temp/Fukt/CO2-givare modbus
  • Temp/Fukt/CO2-givare modbus

Temperature/Humidity/CO2 transmitter modbus

07-009

Temperature, humidity and CO2 transmitter

Our affordable temp / humidity / CO2 transmitter for wall mount installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.
24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor.

No LCD-display

€203.74
Tax included
Quantity
Out-of-Stock

Description

Temperature, humidity and CO2 transmitter

Our affordable temp / humidity / CO2 transmitter for wall mount installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.
24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor.

No LCD-display

Specifikationer:

  • Sensor for CO2: NDIR infrared sensor with auto-calibration
  • Combined digital temperature and humidity sensor
  • Measuring range CO2: 0-2000ppm
  • Measuring range temperature: 0-50 ° C
  • Measuring range Humidity: 0-100% RH
  • Accuracy CO2 + -40ppm or 3% of the measuring range (resolution 1ppm)
  • Accuracy temp: + -0.5 ° C (resolution 0.1 ° C)
  • Accuracy Humidity: + -3% RH (resolution 0.1%)
  • Lifetime: CO2 15 years (typically)
  • Lifteime temp / moisture: 10 years (typically)
  • Reaction time: 2 hours (The first time) 2 minutes at normal operation (See pdf for more data)
  • Power supply: 24V AC / DC
  • Power consumption 3.5W (Typical 2.5 W)
  • Analog outputs: 3 pieces analog 0-10V / 4-20mA and MODBUS
  • Modbus: RS485, 19200bps, 15KV antistatic protection, independent base address
  • Environmental Operating: -10 to +50 degrees, 0-95% (non-condensing)
  • Environment Storage: -40 to + 70 ° C, 5-95% RH
  • Weight 320 g
  • Installation: wall mount
  • Housing: PC / ABS
  • Protection: IP40
  • CE-approved
Product Details
07-009
07009
Accessories

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price €17.67
More
In Stock (18 pcs.)
9 other products in the same category:

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price €6.13
More
In Stock (61 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price €17.67
More
In Stock (18 pcs.)

Reference: 12-016

Portable CO2 temperature & humidity monitor

(1)

Portable CO2 temperature & humidity monitor Air quality monitor with Infrared NDIR-CO2 sensor as well as temperature and humidity sensors.This product is an air quality monitor that measures and shows carbon dioxide (CO2), temperature and humidity, it combines real-time monitoring of CO2, temperature and humidity on the display. Alarms for high CO2...

Price €26.59 Regular price €53.18
More
In Stock (15 pcs.)

Reference: 07-007

Brand: Energibutiken, WebIQ AB

Temperature/Humidity/CO2 transmitter modbus

(0)

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. No LCD-display

Price €278.67
More
In Stock (2 pcs.)

Reference: 07-006

Brand: Energibutiken, WebIQ AB

Temp/Fukt/CO2-givare modbus

(0)

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. With LCD-display

Price €293.76
More
Out-of-Stock

Reference: 07-002

Brand: Energibutiken, WebIQ AB

Humidity and temperature transmitter with display

(0)

Humidity and temperature transmitter with display Wall mount combined humidity and temperature transmitter with LCD display suitable for advanced applikations such as clean rooms, greenhouses, warehouses, shops, commercial buildings, etc. The sensor has 2 outputs with 0-10V or 4-20mA (selectable by jumpers) and RS485 Modbus.

Price €114.97
More
Out-of-Stock
Comments (0)