Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (53 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (351 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (299 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (232 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (665 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (51 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(17)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (15 pcs.)
All best sellers
Actaris CF ECHO II Qp 2.5 heat meter
  • Actaris CF ECHO II Qp 2.5 heat meter

Itron US ECHO II Qp 3.5 heat meter

12-003

Itron US ECHO II Qp 3.5 heat meter

Actaris heat meter used to measure the energy and power in waterborne systems.
The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Volume discounts

Quantity Unit discount You Save
2 SEK 35.00 Up to SEK 70.00
3 SEK 50.00 Up to SEK 150.00
SEK 4,395.00
Tax included
Quantity
Product available for orders

Description

Itron US ECHO II Qp 3.5 heat meter

Use this (larger) heat meter for ordinary heating systems with system flows of up to 5000 l/hour.

Itrons heat meter used to measure the energy and power in waterborne systems.
The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.


The heat meter can also be used in cases where you want to buy heat from an other person's heating system, eg in a commercial building with a large single boiler, the meter is often used in district heating systems to measure individual household energy consumption.
Also available with a pulse output module.

General:

  • US Echo II 3,5-25-260 G
  • Qp = 3.5 m3/h
  • Qs = 7 m3/h
  • Qi = 35 l/h
  • Qc I = 7 L/h
  • Connection G 1 1/4"/PN 16
  • DN 25
  • Length = 260 mm
  • Temperature range 0-180°C
  • Cable length flow meter to electronic unit: 1.5 m
  • TG 025-211, Pt 100 sensor Direct 1.75 m cable + ½ "MS-nipple X 2
  • Battery-powered 10-year battery, battery replaceable

Complete KIT with:

Flow meter

Electronic unit

Temp sensors

1/2" temp sensor mounting bushings.

Product Details
12-003
12003
Accessories

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 119.00
More
In Stock (15 pcs.)

Reference: 12-011

Brand: Itron

230 V power supply for heat meter CF-Echo II

(0)

230 V power supply for CF-Echo II When logging energy, power, flow, temperature and volume using Logger 3030 PRO and Itron CF-Echo II, you might need to replace the battery module that CF-Echo II is equipped with as standard.

Price SEK 445.00
More
In Stock (5 pcs.)
13 other products in the same category:

Reference: 12-001

Itron CF ECHO II Qp 1.5 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,651.00
More
Product available for orders (0 pcs.)

Reference: 12-004

Brand: Itron

Itron US ECHO II Qp 6.0 heat meter

(0)

Itron US ECHO II Qp 6.0 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 4,595.00
More
Product available for orders (0 pcs.)

Reference: 13-005

Connection Kit DN15

(0)

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 109.00
More
In Stock (13 pcs.)

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

(2)

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Price SEK 375.00
More
in stock (5 pcs.)

Reference: 12-015

Itron CF ECHO II Qp 0.6 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,595.00
More
In Stock (7 pcs.)

Reference: 12-002

Itron CF ECHO II Qp 2.5 heat meter

(0)

Itron CF ECHO II Qp 2.5 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 2,599.00
More
In Stock (2 pcs.)

Reference: 12-011

Brand: Itron

230 V power supply for heat meter CF-Echo II

(0)

230 V power supply for CF-Echo II When logging energy, power, flow, temperature and volume using Logger 3030 PRO and Itron CF-Echo II, you might need to replace the battery module that CF-Echo II is equipped with as standard.

Price SEK 445.00
More
In Stock (5 pcs.)

Reference: 12-010

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 219.00
More
Product available for orders (-4 pcs.)

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 119.00
More
In Stock (15 pcs.)
Comments (0)