Temp / Humidity / Light Module THLIQ-01
High quality module with built-in temperature, humidity and light sensor, based on temp / humidifier HTU21D.
Directly on the PCB is also a light sensor indicating incoming light output.
Fits Logger 3030, 3030 PRO Modbus and Loggar 2020
- Temperature: -40 to +125 degrees with + -1 ° C accuracy in the range -30 to + 95 ° C
- Humidity RH: 0-100% with accuracy of + -2% in the range 20-80% at 25 ° C, hysteresis + -1%
- Light source: Provides a value that depends on the environment and the enclosure it is in, so the value becomes an indication of the light radiation and is not an exact value in LUX or Lumen.
Dimensions: 60 X 30 X 18 mm.
At the top of the housing is a hole for wall or other suitable surface mounting.
When the placement inside the housing partially shields the light radiation and when the placement of the module also determines how much light it is exposed to, the values below are very coarse, but in general these values can be assumed to match quite well.
- 50 lux: about general lighting in a home
- 320-500 lux: office light
- 400 lux: sunrise / sunset
- 10000-25000 lux: daylight but not direct sunlight
- 32000-100000 lux: direct sunlight