Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 03-033

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 05-001

Brand: Energibutiken, WebIQ AB

Pressure Sensor 0-6 Bar

LONN-2SX Pressure transmitter 0-6 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Reference: 05-003

Pressure Sensor 0-2 Bar

LONN-2SX Pressure transmitter 0-2 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 05-002

Brand: Energibutiken, WebIQ AB

Pressure Sensor 0-10 Bar

LONN-2SX Pressure transmitter 0-10 bar, 4-20 mA. The sensor is widely used in many different areas, such as various applications in both real estate, homeowners, industry and HVAC. The pressure sensor is small, lightweight and made of stainless steel ( EN 1.4301, AISI 304), o-ring seals makes it resistant to water IP 66

Reference: 02-053

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm 3 meter

PT1000 sensor, max 200°C, 3 meter 6 X 50 mm 3-wire universal temperature sensor.Suitable for measurement of all media that does not get more than 200°C hot.

Reference: 29-001

BRIDGE LR LoRa-brygga för trådlös modbus upp till 3 km

PickData LoRa Bridge for Modbus Wireless is used for reading wireless bus units. Perfect when, for example, electricity meters in different buildings need to be read off and it is difficult to pull cable.

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 04-011

Brand: Energibutiken, WebIQ AB

Ethernet cable

Ethernet cable Unshielded cabling consisting of a 4-pair cable, Category 5e (Cat 5e), and an RJ45 connector on both ends. This cable are needed to connect Logger 2020 to your router if you want to run your Logger 2020 against the web service e-logger.se - or if you need to update the software in your Logger 2020.Select cable length before adding to cart.

Reference: 04-022

Heat conductive paste 3 grams

Heat conductive paste 3 grams This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Reference: 03-012

Brand: Energibutiken, WebIQ AB

Extern onewire 4x20 oled-display

External onewire 4x20 oled display NOTE: Yellow characters. External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast. The display has controls US2066 and can also be used with Rasberiy PI,...

Reference: 09-004

Brand: Energibutiken, WebIQ AB

Miljömodul

Environmental module Can be connected to two of our loggers, Logger 1010 or Logger 3030. Up to nine different environmental measurements!

Reference: 04-016

Modul Modbus med 8 analoga ingångar

Modbus module with 8 analog inputs 8 channels of analog type: 0-20mA / 4-20mA DC, with 12bit AD chip With RS485 MODBUS RTU. Can be combined with industrial configuration software, PLC and touchpad Communication circuit is thunderstorm and interference protected. Works for Logger 3030 PRO Mobus.

Reference: 03-032

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 03-011

Power supply 24 VDC / 0.5 A

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Reference: 02-063

Modbus/PT1000 modul + 4 Digitala in.

Reference: 23-001

Power supply 12 VDC / 2.1 A

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Reference: 03-036

Black casing for 1-wire OLED display NHD-0420CW-AW3

Black casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Reference: 03-037

White casing for 1-wire OLED display NHD-0420CW-AW3

White casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Reference: 02-062

PT1000 to Modbus (RS485) Modul

Reference: 02-033

Brand: Energibutiken, WebIQ AB

Hose clamp

Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 02-003

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 5 meter

Sensor 5 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 5 meter cable Chip: Dallas DS18B20

Reference: 13-001

Brand: Energibutiken, WebIQ AB

Flow Meter Qp 1.5 with Pulse Output

Flow Meter Qp 1.5 Pulse output Flow meter with pulse output for measurment of flow in the range of 30-3000 liters/h with an accuracy better than +-2%.

Reference: 02-054

Brand: Energibutiken, WebIQ AB

PT1000 2-wire Universal temp sensor 6 mm, 5 Meter

PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 2-wire universal temperature sensor with 5 meter cable, suitable for Logger 3030, Logger 3030 PRO Modbus and Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.

Reference: 02-050

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 5 meter, 2-wire

PT1000 tube surface sensor 5 meter 2-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Can replace Danfoss ESMC