Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €25.55
More
In Stock (62 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price €0.68
More
In Stock (498 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price €72.56
More
In Stock (426 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price €113.41
More
In stock (329 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price €0.51
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price €143.49
More
In Stock (107 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price €21.28
More
In Stock (50 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(14)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price €64.44
More
In Stock (67 pcs.)
All best sellers

There are 53 products.

Showing 1-28 of 53 item(s)
Active filters
  • Categories: PT1000 SENSORS
  • Categories: TEMP/HUMIDITY/CO2 SENSORS
  • Categories: WATER METER

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price €21.28
More
In Stock (75 pcs.)

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

(0)

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Price €21.28
More
In Stock (154 pcs.)

Reference: 13-006

Brand: Itron

Flow meter Qn 2.5

(0)

Flow meter Qn 2.5. Water meter Qn 2.5 cold water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical mounting.

Price €39.74
More
In Stock (41 pcs.)

Reference: 13-007

Brand: Itron

Flow meter Qn 2.5 hot water

(0)

Flow meter Qn 2.5. Water meter Qn 2.5 hot water This water meter is suitable for measuring flows / water consumtion in villas, perhaps primarily in tap water systems or smaller heating systems. Recommended flow for installation in heating systems is max 2500 l / h Counter showing the water consumption in XXXXX.XXX m3 format. Horizontal or vertical...

Price €45.21
More
In Stock (39 pcs.)

Reference: 07-007

Brand: Energibutiken, WebIQ AB

Temperature/Humidity/CO2 transmitter modbus

(0)

Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. No LCD-display

Price €268.26
More
In Stock (2 pcs.)

Reference: 13-009

Brand: Itron

Cyble M-bus module

(1)

Cyble M-bus module for Unimag Cyble water meter An M-bus module for Unimag Cybel water meter for use in remote reading systems (AMR) or in datalogging of flow and / or volume in other contexts, such as In tap water systems or heating systems.

Price €70.85
More
In Stock (27 pcs.)

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price €5.90
More
In Stock (61 pcs.)

Reference: 13-008

Brand: Itron

Puls module Cyble sensor 2W

(0)

Cyble Sensor pulse module with 1 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Price €58.11
More
In Stock (34 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price €17.01
More
In Stock (18 pcs.)

Reference: 13-005

Connection Kit DN15

(0)

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Price €9.32
More
In Stock (12 pcs.)

Reference: 12-016

Portable CO2 temperature & humidity monitor

(1)

Portable CO2 temperature & humidity monitor Air quality monitor with Infrared NDIR-CO2 sensor as well as temperature and humidity sensors.This product is an air quality monitor that measures and shows carbon dioxide (CO2), temperature and humidity, it combines real-time monitoring of CO2, temperature and humidity on the display. Alarms for high CO2...

Price €25.60 Regular price €51.19
More
In Stock (8 pcs.)

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price €8.46
More
In Stock (30 pcs.)

Reference: 12-010

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price €18.72
More
In Stock (2 pcs.)

Reference: 02-045

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

(0)

PT1000 High temp sensor -50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Price €24.70
More
In Stock (50 pcs.)

Reference: 13-011

Puls module Cyble sensor 2W K10

(0)

Cyble Sensor pulse module with 10 pulse / liter Cyble communication modules have been designed to meet the requirements of MID for those who want to read their water meters.With hundreds of thousands of installed cyble sensors, we have proven that this patented technology ensures reliable remote reading of water meters, both when reading conter, but also...

Price €58.11
More
In Stock (1 pcs.)

Reference: 02-021

Brand: Energibutiken, WebIQ AB

PT1000 M8X50 mm temp sensor, 3-wire, 3 meter

(0)

PT1000 M8 high temp sensor, 3-wire, 3 meter Innovative new 3-wire M8 PT1000 high temp sensor. Suitable for measurement of all media that does not get more than 400 ° C hot, here in the form of an M8 bolt that makes it easy to measure fumes and other things wherer you can drill/thread a threaded hole fitting the M8 bolt temp sensor. M8 Nut included

Price €33.76
More
In Stock (18 pcs.)