- Reduced price
![Bärbar CO2-temperatur & fukt-monitor Bärbar CO2-temperatur & fukt-monitor](https://www.energibutiken.se/1635-large_default/barbar-co2-temperatur-fukt-monitor.jpg)
Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
Air quality monitor with Infrared NDIR-CO2 sensor as well as temperature and humidity sensors.
This product is an air quality monitor that measures and shows carbon dioxide (CO2), temperature and humidity, it combines real-time monitoring of CO2, temperature and humidity on the display. Alarms for high CO2 when the level exceeds 1000 ppm (beeping sound).
This product is an air quality monitor that measures and shows carbon dioxide (CO2), temperature and humidity, it combines real-time monitoring of carbon dioxide (CO2), temperature and humidity on the display.
Note that the unit alarms with a beeping sound when the CO2 content exceeds 1000 ppm and as long as it rises, as soon as it starts to drop, the alarm goes silent - the alarm is NOT adjustable.
Display method: Normal screen display
Atmospheric pressure: 86Kpa - 106Kpa
CO2 detection method: Infrared (NDIR)
Sampling time: 1.5 seconds
Product size: 90 x 90 x 50 mm
Detection temperature: -10 ° C to 50 ° C
Relative humidity: 20% - 85%
RH Measurement accuracy: ± 1 ° C
Measurement accuracy: ± 4%
Storage temperature: -10 ° C to 60 ° C
Concentration unit for CO2: PPM
Power source: Lithium battery with a capacity of 2000 mAh, 5V DC charging via micro-USB port
Product weight: 200 g
Features: Standard screen display - Test variables: Carbon dioxide (CO2), temperature, humidity - Large 2200mAh capacity lithium battery -5V Micro USB charging - Low battery warning
1. Start up: When you press and hold the power switch, the air quality monitor starts up. ①display screen OwerPower button, used to switch the device on / off for 3 seconds or to switch Celsius and Fahrenheit with a single press ③hole in the back ④ battery cover on the back Footplates ⑥ side airflow hole ⑦USB charging port 2. About charging When for charging low battery is displayed, the device must be charged. Insert the supplied or other compatible micro-USB charging cable into the device. Connect the other end to a USB DC charger (eg a smart phone charger) which outputs DC 5V at> = 1000mA. Recharge completely at least 2-3 hours before use. Avoid charging with a USB computer port that only outputs 500 mA.
Reference: 07-007
Brand: Energibutiken, WebIQ AB
Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. No LCD-display
Reference: 03-011
Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.
Reference: 07-002
Brand: Energibutiken, WebIQ AB
Humidity and temperature transmitter with display Wall mount combined humidity and temperature transmitter with LCD display suitable for advanced applikations such as clean rooms, greenhouses, warehouses, shops, commercial buildings, etc. The sensor has 2 outputs with 0-10V or 4-20mA (selectable by jumpers) and RS485 Modbus.
Reference: 07-009
Brand: Energibutiken, WebIQ AB
Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for wall mount installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. No LCD-display
Reference: 07-006
Brand: Energibutiken, WebIQ AB
Temperature, humidity and CO2 transmitter Our affordable temp / humidity / CO2 transmitter for duct installation has four outputs, three analog 0-10V or 4-20mA (selectable by jumpers) and Modbus output.24V AC / DC supply voltage, long life thanks to quality sensors, NDIR infrared CO2 sensor. With LCD-display
Reference: 09-004
Brand: Energibutiken, WebIQ AB
Environmental module Can be connected to two of our loggers, Logger 1010 or Logger 3030. Up to nine different environmental measurements!
Reference: 22-001
250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be better to use a 600 OHM resistor as it provides...
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Air quality monitor with Infrared NDIR-CO2 sensor as well as temperature and humidity sensors.
This product is an air quality monitor that measures and shows carbon dioxide (CO2), temperature and humidity, it combines real-time monitoring of CO2, temperature and humidity on the display. Alarms for high CO2 when the level exceeds 1000 ppm (beeping sound).