Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 299.00
More
In Stock (57 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (361 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (333 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (247 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (695 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (49 pcs.)

Reference: 02-006

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor

(0)

Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (41 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(16)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 799.00
More
In Stock (21 pcs.)
All best sellers

There are 23 products.

Showing 1-23 of 23 item(s)
Active filters
  • Categories: HEAT METERS
  • Categories: MEASURING TRANSDUCERS
  • Categories: POOL & SPA ACCESSORIES
  • Categories: ULTRASONIC LEVEL SENSOR

Reference: 12-015

Itron CF ECHO II Qp 0.6 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,595.00
More
In Stock (1 pcs.)

Reference: 06-001

Brand: Energibutiken, WebIQ AB

PT1000 TRANSDUCER to 0-10 volt

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (6 pcs.)

Reference: 17-003

Pool Spounge 18 pcs

(0)

Pool sponge 18 pcs 18-pack Melamine cleaning sponge, fantastically effective for cleaning the waterline in your pool, but also incredibly effective for cleaning plastic and / or and chrome pool details. Highly recommended by us, we use it ourselves both for the pool and in the kitchen / toilet - a must if you have not already tried!

Price SEK 179.00
More
In Stock (26 pcs.)

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 810.00
More
In Stock (8 pcs.)

Reference: 12-001

Itron CF ECHO II Qp 1.5 heat meter

(0)

Itron CF ECHO II Qp 1.5 heat meter Itron heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels. Pulse/M-bus card as accessorie.

Price SEK 2,651.00
More
In Stock (6 pcs.)

Reference: 22-001

250 OHM Resistor

(0)

250 ohm resistor Suitable for analogue sensors with 4-20 mA output to be connected to Logger 3030, Logger 3030 PRO or Expansion module ADMIQ. The resistor gives an input of 1-5 V on the analogue inputs if coupled as described in the manuals. For the analog 0-12 V terminals (iADC) on Logger 3030, it may be  better to use a 600 OHM resistor as it provides...

Price SEK 69.00
More
In Stock (39 pcs.)

Reference: 12-002

Itron CF ECHO II Qp 2.5 heat meter

(0)

Itron CF ECHO II Qp 2.5 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 2,599.00
More
In Stock (3 pcs.)

Reference: 03-011

Power supply 24 VDC / 0.5 A

(0)

Power supply 24 VDC / 0.5 A For use with our UL1 level meter that requires 24V power supply, or other products requiring 24V power supply and need be connected to Logger 3030 PRO and its galvanically disconnected analog inputs (iADC), either via 4-20 mA or 0-10 V signal.

Price SEK 199.00
More
In Stock (15 pcs.)

Reference: 23-001

Power supply 12 VDC / 2.1 A

(0)

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Price SEK 295.00
More
In Stock (2 pcs.)

Reference: 30-001

Avståndsmätare ultraljud US-016

(0)

Analog Ultrasonic Ranging Module US-016 A small, simple rangefinder based on the ultrasound principle, emits a pulse and measures how long it takes for the sound to come back. Based on this, the distance to that which reflected the sound is calculated.

Price SEK 109.00
More
In Stock (11 pcs.)

Reference: 12-009

Brand: Itron

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 99.00
More
In Stock (22 pcs.)

Reference: 12-008

M-bus + Pulse Output board for Actaris CF ECHO II heat meter

(2)

Pulse Output board for Actaris CF ECHO II heat meter M-bus + Pulse Output option board for Actaris CF ECHO II Heat meters, if you want to monitor your Heat Meter to for example Logger 2020, you'll need this accessory. Loggning heat meters to Logger 3030 PRO demands our modbus to M-bus converter. 1 pulse / kWh

Price SEK 375.00
More
in stock (10 pcs.)

Reference: 12-011

Brand: Itron

230 V power supply for heat meter CF-Echo II

(0)

230 V power supply for CF-Echo II When logging energy, power, flow, temperature and volume using Logger 3030 PRO and Itron CF-Echo II, you might need to replace the battery module that CF-Echo II is equipped with as standard.

Price SEK 445.00
More
In Stock (10 pcs.)

Reference: 12-010

Connection Kit DN20

(0)

Connection Kit DN 20 Used when connecting heat meters and/or water meters. Converts 1" straight thread to 3/4" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 219.00
More
In Stock (2 pcs.)

Reference: 13-005

Connection Kit DN15

(0)

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Price SEK 109.00
More
In Stock (13 pcs.)

Reference: 12-003

Brand: Itron

Itron US ECHO II Qp 3.5 heat meter

(0)

Itron US ECHO II Qp 3.5 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 4,395.00
More
Product available for orders (0 pcs.)

Reference: 12-004

Brand: Itron

Itron US ECHO II Qp 6.0 heat meter

(0)

Itron US ECHO II Qp 6.0 heat meter Actaris heat meter used to measure the energy and power in waterborne systems.The heat meter can be used eg to measure the output and the cumulative energy supplied by heat pumps, biomass plants and solar panels.

Price SEK 4,595.00
More
Product available for orders (0 pcs.)