Kabel BRP45

Reference: 25-044

copy of Main switch / Load switch

Main switch / Load switch Intended as an incoming circuit breaker in standard power stations (power plant). The main switch can be locked in the off position with a standard padlock.

Reference: 01-084

Carlo Gavazzi EM24 Modbus TCP

Reference: 25-045

Earth fault circuit breaker type B, 40A, 30mA 1-phase (2pol) 4 modules

Earth fault circuit breaker type B, 40A, 30mA 1-phase (2pol) 4 moduls CE-marked Earth fault circuit breaker for charging station for electric cars, electric hybrids, charging hybrids. Ground fault circuit interrupter of TYPE B has been a legal requirement since 2017 for charging electric cars. We offer the right switch at an unbeatable price. The earth...

Reference: 15-016

Vibration damper Premium

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Reference: 07-010

Temp pocket for ventilation

Temp pocket for ventilation This product is perfect for PT100, PT1000 and DALLAS 1-WIRE only for 6 mm enclosures. The temp pocket must be able to be installed in existing ventilation ducts in order to be able to measure temperatures in that part of the ventilation system.

Reference: 25-032

63A contactor / Relay 3 modules three phase

Standard contactor / Relay three phase 63 A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, electric boilers, heat pumps - simply all places where the load exceeds e.g. what a switch or a smaller relay can handle. Can be used as a power relay for control using Logger 1010 or Logger 3030, for three-phase loads...

Reference: 15-002

Brand: Energibutiken, WebIQ AB

Vibration dampers with washers and nuts

Vibration dampers with washers and nuts Extra soft vibration dampers, complet kit of 4 pcs including washers and nuts, for those who already have a heat pump mounted on wall brackets and are disturbed by the vibrations from/of the wall. The kit includes 4 vibration dampers.

Reference: 26-031

Stickpropp PVC Schuko White

Reference: 05-005

Tryckgivare 0-100 bar

LONN-2SX 0-100 bar

Reference: 24-016

Reservdelsbatteri till Climatech K3

Reference: 26-037

Kopplingsdosa IP65

Reference: 06-002

PT1000 TRANSDUCER 4-20 mA

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Reference: 18-001

Brand: Energibutiken, WebIQ AB

IR-thermometer

Measuring range -50 ° C - + 380 ° C Fever thermometer? Read more under "More info". My personal favorite after testing almost 10 different IR thermometers! IR Thermometer Adjustable emissivity Adjustable + - 4.5 ° C Battery included.

Elmätare 3-fas Carlo Gavazzi EM540-M1 M-bus MID

Reference: 03-034

Wi-FI smart timer And mätare DIN