- Out-of-Stock

Reference: 02-008
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 04-013
Brand: Energibutiken, WebIQ AB
Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.
Reference: 01-001
Brand: Eastron
MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 04-012
Brand: Energibutiken, WebIQ AB
Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.
Reference: 25-001
Chint NL210 3-phase earth leakage circuit breaker TYPE B Ground fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.
Reference: 02-033
Brand: Energibutiken, WebIQ AB
Hose clamp for fastening Pipe wrap probe Fits Pipe wrap probe Dallas 1 PRO and PT1000 and PT100 Pipe wrap probe. Takes pipes up to 100 mm diameter.
Reference: 02-006
Brand: Energibutiken, WebIQ AB
Tube surface Sensor, affordable 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20
Reference: 15-001
Brand: Energibutiken, WebIQ AB
Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...
Eastron SDM230 LoRa WAN MID is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km.
The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network.
The device measures and displays properties of single-phase two-wire (1P2W), single-phase three-wire (1P3W) networks. The measurement parameters include voltage (V), current (A), frequency (Hz), power (kW / kVar / kVA), import / export / total energy (kWh / kVarh).
Single-phase electricity meter SDM230 LoRa WAN is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km.
The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network.
The device measures and displays properties of single-phase two-wire (1P2W), single-phase three-wire (1P3W) networks. The measurement parameters include voltage (V), current (A), frequency (Hz), power (kW / kVar / kVA), import / export / total energy (kWh / kVarh).
Can be used for invoicing of energy consumtion due to the MID-certification.
Specifications:
Accuracy:
Environmental Characteristics:
Mechanical Characteristics
Safety
Communications
Reference: 01-063
Distribution box for 4 modules, white. For safe installation of relays and / or electricity meters for DIN rail. W X H X D = 110 X 180 X 82 mm
Reference: 01-068
Brand: Carlo Gavazzi
Electricity meter 1-phase Modbus Carlo Gavazzi EM111-S1 Single-phase electricity meter with backlit LCD display and built-in touch keypad. EM111DINAV81XS1PFB
Reference: 01-043
Electricity meter single phase DCM 230 modbus NOTE! Supply voltage 9-40V DC Electricity meter that have counter, odometer (which can be resetted), instant power meter and more (click on "more" for full specifications). The electricity meter has a litted display, pulse output and connection for Modbus RTU communication. Accuracy better then 1% Backlit...
Reference: 01-031
Distribution box 8 modules Premium, white. For safe installation of electricity meters, relays, circuit breakers, earth leakage circuit breaker mm DIN rail.
Reference: 01-022
Brand: Energibutiken, WebIQ AB
SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...
Reference: 01-030
Distribution box for 13 modules, white. For safe installation of relays and / or electricity meters for DIN rail.
Reference: 01-027
Brand: Inepro
INEPRO three phase electric meter PRO380 ModbusFor more detailed information on this meter, refer to the MANUAL.featuresThree phase active energy meterConforms and Certified for MID B and D Standard (Can be used for billing purposes)100A online
Reference: 01-038
Brand: Energibutiken, WebIQ AB
Openable Power Coils 1200A / 5A, Top Quality! Inner diameter of the coil is 80 X 120 mm. Fits our electricity meters SDM630 MCT V2. External dimensions: 143 X 185 X 47 mm Weight / coil 1,366 kg 1 pcs (Buy 3 pcs for 3-phase electricity meters) Accuracy 0.5%
Reference: 01-078
Brand: Carlo Gavazzi
Electricity meter 3-phase Carlo Gavazzi EM330-HS1 Modbus for measuring with current coils Three-phase electricity meter with Modbus for measuring with current coils, model designation: EM330DINAV53HS1PFB for 3-phase (65A/400V). Approved for debit metering, used for net metering/production. Can be logged with Logger 1010 or Logger 3030 PRO Modbus.
Reference: 01-005
Brand: Eastron
SDM630 Modbus MCT V2 3-phase energy meter. (Non MID) For use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger...
Reference: 01-070
Brand: Carlo Gavazzi
Carlo Gavazzi EM340, model: em340dinav23xo1pfb Three-phase energy meter with backlit LCD display with integrated touch keypad. Particularly indicated for active energy metering and for cost allocation in applications up to 65 A (direct connection), with dual tariff management availability. It can measure imported and exported energy or be programmed to...
Reference: 01-009
Brand: Eastron
Eastron SDM120D MID single phase meter Affordable electricity meter with both flashing diode and pulse output with 1000 imp / kWh. One module wide.
Reference: 01-004
Brand: Eastron
Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.
Reference: 01-039
Openable Power Coils 3000A / 5A, Top Quality! Inner diameter of the coil is 80 X 160 mm. Fits our electricity meters SDM630 MCT V2, SDM120CTM, SDM120CTMB External dimensions: 175 X 245 X 72 mm Weight / spool 2,945 kg Includes 1 pcs (Buy 3 pcs to three-phase electricity meters) Accuracy 0.5%
Eastron SDM230 LoRa WAN MID is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km.
The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network.
The device measures and displays properties of single-phase two-wire (1P2W), single-phase three-wire (1P3W) networks. The measurement parameters include voltage (V), current (A), frequency (Hz), power (kW / kVar / kVA), import / export / total energy (kWh / kVarh).
* Required fields
Eastron SDM230 LoRa WAN MID is a new generation single-phase multi-function electricity meter with wireless communication, the meter has been built Lora WAN module. Range up to 3 km.
The electricity meter can wirelessly send data to the nearest LoRa WAN gateway, or to an existing local LoRa WAN network.
The device measures and displays properties of single-phase two-wire (1P2W), single-phase three-wire (1P3W) networks. The measurement parameters include voltage (V), current (A), frequency (Hz), power (kW / kVar / kVA), import / export / total energy (kWh / kVarh).