Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (437 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(13)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (72 pcs.)
All best sellers
  • Out-of-Stock
PT1000 high temp sensor 6 mm 400°C
  • PT1000 high temp sensor 6 mm 400°C
  • PT1000 high temp sensor 6 mm 400°C
  • PT1000 high temp sensor 6 mm 400°C

PT1000 high temp sensor 6 mm 400°C 3 meter

02-045

PT1000 High temp sensor

-50 to +400°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQ
Suitable for measurement of all media that does not get more than 400° C hot.

This sensor can also replace sensors such as Danfoss ESMB-12

Volume discounts

Quantity Unit discount You Save
10 10% Up to SEK 249.00
SEK 249.00
Tax included
Quantity
Out-of-Stock

Description

Temperature sensor PT 1000 max 400° C

Three wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQ
Suitable for measurement of all media that does not get more than 400° C hot.

This sensor can also replace sensors such as Danfoss ESMB-12

General:

  • Material sensor are: Stainless steel
  • Sleeve size:: 6x50mm
  • Cable length: 3 m
  • Protection: IP65
  • Weight: 80 g
  • Electrical connection: pressure sleeve on the cable ends

Operating temperature:

  • Sensor Point: -50 ° C ... +400° C
  • Cable: -50 ° C ... +400° C
Product Details
02-045
02045
16 other products in the same category:

Reference: 02-035

Brand: Energibutiken, WebIQ AB

Temp pocket stainless steel 1/2"

(0)

Temp pocket in stainless steel 1/2 ". Temp pocket in stainless steel. Temp pocket suitable for e.g. solar panels or in installations where a certain mechanical wear can occur. The actual temp pocket in contact with the media is AISI 316Ti and the "head" is in AISI 303 Fits our temperature sensors with 6 mm protective sleeve over the temperature sensor.

Price SEK 159.00
More
In Stock (3 pcs.)

Reference: 02-037

Brand: Energibutiken, WebIQ AB

Compression fitting 1/4"

(0)

Compression fitting 1/4" Smooth compression fittings for mounting our temperature probes with 6 mm protective cover (see picture). This compression fitting allows you to, via a a T-pipe coupling, plug in your temp sensor directly in the flow of the media you are measuring the temperature of.

Price SEK 139.00
More
In Stock (7 pcs.)

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

(0)

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Price SEK 115.00
More
In Stock (8 pcs.)

Reference: 02-012

Brand: Energibutiken, WebIQ AB

PT1000 outdoor temp sensor

(0)

PT1000 Outdoor temp sensor is a 2 (or 3)-wire temperature sensors suitable for a Logger 2020's högtempmodul HTMIQSuitable for outdoor measurements in the temperature range from -50 to +90 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation

Price SEK 249.00
More
In Stock (158 pcs.)

Reference: 06-001

Brand: Energibutiken, WebIQ AB

PT1000 TRANSDUCER to 0-10 volt

(0)

PT1000 TRANSDUCER WITH HOUSING The measuring transducer records the temperature via a connected Pt1000 sensor and coverts the value into a standardized analogue output signal in the range between 0-10V/4-20 mA. 24 measuring ranges can be selected and adjusted with the help of a DIP switch. The offset can be corrected by ±5K using the potentiometer.

Price SEK 799.00
More
In Stock (6 pcs.)

Reference: 02-011

Brand: Energibutiken, WebIQ AB

PT1000 room sensor

(2)

PT1000 Indoor temp sensor Two-wire (or 3-wire) temperature sensors PT1000-standardSuitable for indoor measurements in the temperature range -35 to +70 ° C..Can replace Danfoss ESMT, ESM 10, ESM-11 and others sensors used in building automation.

Price SEK 249.00
More
In Stock (76 pcs.)

Reference: 04-010

Brand: Energibutiken, WebIQ AB

Heat conductive paste 3 ml

(0)

Heat conductive paste 3 ml This paste is great to use when installing a temp sensor to pipes, tanks or in temp pockets. A small amount of paste is enough to improve the measurement accuracy, particularly in terms of reaction times during sudden temperature changes.

Price SEK 47.00
More
Out-of-Stock

Reference: 02-061

Brand: Energibutiken, WebIQ AB

PT1000 high temp sensor 6 mm 400°C 3 meter

(0)

PT1000 High temp sensor -50 to +200°C 3-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. This sensor can also replace sensors such as Danfoss ESMB-12

Price SEK 360.00
More
In Stock (41 pcs.)
Comments (0)