Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Reference: 02-046

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 15 meter

Tube surface Sensor Affordable 15 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Reference: 03-012

Brand: Energibutiken, WebIQ AB

Extern onewire 4x20 oled-display

External onewire 4x20 oled display NOTE: Yellow characters. External display for Logger 1010 and Logger 3030 PRO Modbus, can be placed in any place e.g. kitchen, office, living room or similar. OLED means that the display exudes quality and has a very good sharpness and contrast. The display has controls US2066 and can also be used with Rasberiy PI,...

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 23-001

Power supply 12 VDC / 2.1 A

Mean Well S-25-12 power supply 230 VAC to 12 VDC, 2.1 A Switching power supply with 12 V 2.1 A out, adjustable output voltage via potentiometer. Required for those who intend to connect many M-bus meters to our M-Bus Master, but also for those who want to connect sensors that require more power than the Logger 3030 can deliver on their analogue outputs...

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...

Reference: 02-034

Brand: Energibutiken, WebIQ AB

Temp sensor pocket 1/2"

Temp sensor pocket of chrome-plated brass. Temp pocket suitable for such solar heating systems or in facilities where mechanical damage may occur. Fits our temp sensor with 6 mm protective sleeve over the temp sensor.

Reference: 02-023

Brand: Energibutiken, WebIQ AB

PT100 outdoor temp sensor

PT100 Outdoor temp sensor Two-wire temperature sensors suitable for a Logger 2020's high temp module HTMIQ Suitable for outdoor measurements in the temperature range -50°C ... +90°C. Can replace sensors used in PT100-based building automation systems

Reference: 03-007

Brand: Energibutiken, WebIQ AB

Kapsling

Reference: 13-005

Connection Kit DN15

Connection Kit DN15 Used when connecting heat meters and/or water meters. Converts 3/4" straight thread to 1/2" tapered thread Kit includes 2 pcs with gaskets.

Reference: 02-038

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO temp sensor 2 meter

Sensor 2 meter X 6mm Affordable 3-wire temperature sensor with the sensor encapsulated in a 6 mm stainless steel casing, the sensors are specially designed for Logger 2020. This type of temperature sensor are very accurate, calibrated in the factory. 2 meter cable, 3.5 mm diameter Chip: Dallas DS18B20

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 20-015

Brand: Energibutiken, WebIQ AB

Wired Motion Sensor

Well designed wired PIR motion detector, "pet safe" for pets up to 15 kg.

Reference: 04-009

Brand: Energibutiken, WebIQ AB

Analog Light sensor 0-5 V

Light sensor Three-wire lightning to voltage converter, the sensor are adapted to the Logger 2020's A/DMIQ I/O-module, and can be used both as analog sensor to the analog inputs, and for indicatiing status of measured diods/lamps indication service status  - on the digital inputs of the A/DMIQ -module.

Reference: 02-041

Brand: Energibutiken, WebIQ AB

PT1000 Universal temp sensor 6 mm, 5 Meter BK

PT1000 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor with 5 meter cable, suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot.

Reference: 02-044

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm, 5 meter BK

PT100 sensor, max 200°C, 5 meter 6 X 50 mm 3-wire universal temperature sensor suitable for (among others) Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.