M-bus konverter

Reference: 04-004

Brand: Energibutiken, WebIQ AB

Electricity meter sensor, encapsulated

Electricity meter sensor Sensor reads the flashing of IR or UV diodes, particularly for use with Logger 2020 and SunLogger 2020 monitoring units. The sensor is easily connected with a two-core cable to the Logger 2020 or SunLogger 2020 input terminals E1 and/or E2.

Reference: 01-029

Brand: Eastron

Eastron SDM630 MCT M-bus V2 MID 3-phase electricity meter

SDM630 MCT M-bus V2 MID 3-phase energy meter. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, M-bus communication available suitable for our Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Reference: 02-031

Brand: Energibutiken, WebIQ AB

PT100 tube surface sensor, 10 meter cable

PT100 tube surface sensor, 10 meter Sensor, affordable PT100B temperature sensor, 10 meter 3-wire cable, with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68. Note this model cannot be connected to the Logger 3030.  

Reference: 02-019

Brand: Energibutiken, WebIQ AB

PT1000 tube surface sensor, 10 meter, 3-wire

PT1000 tube surface sensor 10 meter 3-wire Sensor, affordable PT1000B temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, max 200°C, IP68.  Can replace Danfoss ESMC

Reference: 02-002

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO outdoor sensor

1-wire PRO Outdoor sensor Three-wire Dallas DS18B20 outdoor sensor suitable for Logger 3030 and Logger 2020's 1-wire inputs. (Can be used on both the parasite power and 3-wire terminals depending on how you connect it.)Solid enclosed outdoor sensor from which to measure the temperature outdoors, range -55 to +125 ° C.

Reference: 04-024

Brand: Finder

Relay module 12/230 V

12 Volt relay module for Logger 1010 & Logger 3030. Relay module: For connection to the digital outputs of Logger 1010 or Logger 3030. Can also be used in combination with one of our contactors for three-phase loads and/or for single-phase currents above 8A. Primary: 12 V dc, 0.5 W Secondary: 230 V ac, max 8 A.

Reference: 02-025

Brand: Energibutiken, WebIQ AB

PT100 Universal temp sensor 6 mm 3 meter

PT100 sensor, max 200°C, 3 meter 6 X 50 mm 3-wire universal temperature sensor.Suitable for measurement of all media that does not get more than 200°C hot. Note this model cannot be connected to the Logger 3030.

Reference: 03-032

Power Supply for Logger 1010 & 3030

Power supply 12 VDC 1 A Power supply suitable for Logger 2020, Logger 3030 and our M-bus Converter Plug-in, switching, stabilized output voltage. Wide input voltage range

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Reference: 13-002

Brand: Energibutiken, WebIQ AB

Flow meter Qn 2.5, with Pulse Output.

Flow meter Qn 2.5, with Pulse output Flow meter with pulse module for measuring flow in the range 30-5000 l/h with an accuracy better than +-2%

Reference: 03-036

Black casing for 1-wire OLED display NHD-0420CW-AW3

Black casing for 1-wire OLED display NHD-0420CW-AW3 This casing is 3D-printed and the finish is not perfect fur to that fact. Fits our 1-wire OLED display and can connect to Logger 1010 and Logger 3030. Size: 113 x 52 x 27 mm

Reference: 09-004

Brand: Energibutiken, WebIQ AB

Miljömodul

Environmental module Can be connected to two of our loggers, Logger 1010 or Logger 3030. Up to nine different environmental measurements!

Reference: 02-028

Brand: Energibutiken, WebIQ AB

PT100 high temp sensor 6 mm 400°C 3-wire, 3 meter

PT100 High temp sensor -50 to +400°C 2-wire universal high temp temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for measurement of all media that does not get more than 400° C hot. Note this model cannot be connected to the Logger 3030.

Reference: 02-022

Brand: Energibutiken, WebIQ AB

PT100 Room sensor

PT100 Room temp sensor Two-wire temperature sensor suitable for Logger 2020's high temp module HTMIQSuitable for indoor measurements in the temperature range -35 to +70 ° C.

Reference: 29-001

BRIDGE LR LoRa-brygga för trådlös modbus upp till 3 km

PickData LoRa Bridge for Modbus Wireless is used for reading wireless bus units. Perfect when, for example, electricity meters in different buildings need to be read off and it is difficult to pull cable.

Reference: 01-022

Brand: Energibutiken, WebIQ AB

SDM630 Modbus MCT V2 MID 3-phase electricity meter

SDM630 Modbus MCT V2 3-phase energy meter. MID-approved, for use with current transformators (Coils) 50 A and up. We stock 50, 100 and 200 A coils. Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our...