Reference: 02-008

Brand: Energibutiken, WebIQ AB

Dallas 1-wire PRO tube surface sensor 5 meter

(0)

Tube surface Sensor, affordable 5 meter 3-wire temperature sensor with the sensor encapsulated in a 14 mm polished "prism" aluminium casing, the sensors are specially adapted to the Logger 2020.  This type of temperature sensor are very accurate, calibrated in the factory. Chip: Dallas DS18B20

Price SEK 249.00
More
In Stock (13 pcs.)

Reference: 04-013

Brand: Energibutiken, WebIQ AB

Cable 3-wire

(0)

Cable 3-wire Unshielded cable for connection of temp sensors/modules and/or to use as a bus conductor in the system. Area: 3 x 0.14 mm2Color: GraySelect cable length before you add to shopping cart.

Price SEK 8.00
More
In Stock (518 pcs.)

Reference: 01-001

Brand: Eastron

SDM72DR MID Energy Meter with resettable trip counter

(7)

MID certified Threee Phase Energy Meter! MID certified 3-phase electricity meters with both non-resetable counter and resettable trip counter, power meter that shows exactly how many watts that is currently consumed.4 modules wide. For 35 mm DIN rail. Perfect for those who want to monitor the house, cottage, heat pump, or whatever it may be! Need help?...

Price SEK 849.00
More
In Stock (434 pcs.)

Reference: 01-004

Brand: Eastron

Eastron SDM630 Modbus MID V2, 3-phase electricity meter

(0)

Modular device for DIN rail 35mm, width: 4 modules, the display shows Volt, Amps, Power, Power factor and more. With pulse output suitable for logging, modbus RTU communication available suitable for our Logger 1010 or Logger 3030 datalogger. MID certification makes it possible to use for billing purposes.

Price SEK 1,327.00
More
In stock (343 pcs.)

Reference: 04-012

Brand: Energibutiken, WebIQ AB

Cable 2X0.14 mm2

(0)

Cable 2X0.14 mm2 Unshielded cable for connection of electricity meter sensors, digital input sensors.Area: 2 x 0.14 mm2Color: Gray Select cable length before adding to cart.

Price SEK 6.00
More
In Stock (747 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 15-001

Brand: Energibutiken, WebIQ AB

Vibration damper Premium

(14)

Vibration dampers Premium "Soft" A kit that we meticulously evaluated and put together to get the best possible way to de-vibrate air heat pumps. This "soft" kit has slightly softer springs than our "hard" kit, especially designed for those who mount in places that are well protected from harsh winds. Our soft package has hardness 5/3 compared to the hard...

Price SEK 754.00
More
In Stock (71 pcs.)
All best sellers
Säkerhetsbrytare Vit
  • Säkerhetsbrytare Vit

Safety switch 3-pol

26-038

Safety switch

The enclosure of the ABB´s side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets (IP65), and hence built for outdoor and indoor use.

SEK 365.00
Tax included
Quantity
In Stock (18 in stock)

Description

Safety switch

The enclosure of the ABB´s side controlled enclosed switches is made of rigid polycarbonate. The enclosure is UV protected, and protected against low pressure water jets (IP65), and hence built for outdoor and indoor use. The enclosure is available in different colors, grey, yellow and white. The cable entries are threaded and have knock out holes for 2 parallell cables, both from top and bottom. Membrane grommets are included (IP54). The handle is padlockable and made for one padlock. The cover is interlocked. The switch is made for 5 wire system, and have a fixed neutral terminal and PE terminal. The terminals are easily accessible for easy installation.
In accordance with the Swedish Electricity Safety Authority's Strong Current Regulations, all new installations of, for example, Air Heat Pumps or other electrical systems should be equipped with a safety switch.

C62.2 Separation The plant part on which work is to be performed shall be separated. Components that are still live after disconnection, such as capacitors and cables, must be discharged with the appropriate device. Advice: Where the power supply can be from multiple directions or when there are multiple power switches, special care is needed to prevent mistakes. Among other things, all windings need to be separated when working on the transformer. Machines' magnetization circuits and neutral points that are not directly grounded must be separated if voltage setting can take place from another plant part. In order to achieve the necessary safety, separation should be done in one of the following ways: 1.3 Use of safety switch.

Dimensions

  • Product Net Width: 111 mm
  • Product Net Height: 130 mm
  • Product Net Depth / Length: 60 mm
  • Product Net Weight: 0.29 kg

Technical

  • Rated Operational Current AC-23A (Ie):
    (380 ... 415 V) 16 A
    (500 V) 16 A
    (690 V) 10 A
  • Conventional Free-air Thermal Current (Ith): 25 A
  • Conventional Thermal Current (Ithe): Fully Enclosed 32 A
  • Rated Impulse Withstand Voltage (Uimp): 8 kV
  • Rated insulation Voltage (Ui): acc. to IEC/EN 60664-1 690 V
  • Rated Operational Voltage: Main Circuit 690 V
  • Rated Conditional Short-Circuit Current (Inc): 25 kA
  • Pollution Degree: 3
  • Handle Color: Grey
  • Handle Type: Side-operated handle
  • Position of Line Terminals: Top In - Bottom Out
  • Standards: IEC 60947-1, -3
  • Number of Poles: 3
  • Connecting Capacity Main Circuit:
    Screw Clamp 0.75...10 mm²
    Screw Clamp / PE Terminal 1pcs, 0.75...10 mm²
  • Cable Entry Position: Up/Down
  • Cable Outlets Per Side: 2xM25 / 2xM25
  • Degree of Protection: acc. to IEC 60529 IP65
  • Enclosure Type: BAS16WTP
  • Enclosure Material: Plastic
  • Maximum Mounted Auxiliary Contacts: 1 NO, 0 NC
  • Mounted Auxiliary Contacts: 1 NO, 0 NC
  • Number of Auxiliary Contacts NC: 0
  • Number of Auxiliary Contacts NO: 1
  • Terminal Type: Screw Terminals
  • Tightening Torque: acc. IEC 60947-1 1.2 N·m
  • Mechanical Durability: 10000

Environmental

  • RoHS Status: Following EU Directive 2011/65/EU

Container Information

  • Package Level 1 Units: 1 piece
  • Package Level 1 Width: 112 mm
  • Package Level 1 Depth / Length: 131 mm
  • Package Level 1 Height: 62 mm
  • Package Level 1 Gross Weight: 0.29 kg
  • Package Level 1 EAN: 7392696423007

Classifications

  • Object Classification Code: Q
  • ETIM 4: EC000216 - Switch disconnector
  • ETIM 5: EC000216 - Switch disconnector
  • ETIM 6: EC000216 - Switch disconnector
  • ETIM 7: EC000216 - Switch disconnector
  • UNSPSC: 39120000
  • WEEE Category: 5. Small Equipment (No External Dimension More Than 50 cm)
  • E-Number (Sweden): 3145281
Product Details
26-038
0
18 Items
16 other products in the same category:

Reference: 26-002

Power supply for charging station

(1)

Electric box for charging stations Complete power supply for charging stations to electric cars and charging hybrids 10-63A (Select in the drop-down list).Contains Electricity Meter SDM72DR, Chint NL210 3-phase earth leakage circuit breaker TYP B and three-phase automatic circuit breaker 10-63A.

Price SEK 2,485.00
In Stock (50 pcs.)

Reference: 26-030

Vägguttag 2-vägs

(1)

Wall socket 2-way earthed IP44 Approved according to the insurance companies' requirements for installation in agriculture. The plastic has very good properties compared to vegetable oils and ammonia. screw connection Polar white.

Price SEK 239.00
More
In Stock (10 pcs.)

Reference: 26-001

Power supply for electric car charging station

(0)

Electric box for charging stations Complete power supply for charging stations to electric cars and charging hybrids 10-63A (Select in the drop-down list).Contains Electricity Meter SDM630 Modbus MID, Chint NL210 3-phase earth leakage circuit breaker TYP B and three-phase automatic circuit breaker 10-63A.

Price SEK 2,814.00
In Stock (39 pcs.)

Reference: 25-040

Jordfelsbrytare Typ B 40A 30mA - 3P (4-Pol)

(0)

Sofielec 3-phase earth fault circuit breaker TYPE B CE-marked Earth fault circuit breaker for charging station for electric cars, electric hybrids, charging hybrids or photovoltaic systems. Ground fault circuit interrupter of TYPE B has been a requirement since 2017 for charging electric cars and in photovoltaic systems. We offer the right switch at an...

Price SEK 1,499.00
More
In Stock (23 pcs.)

Reference: 25-001

Chint NL210 3-phase residual current device TYPE B

(2)

Chint NL210 3-phase earth leakage circuit breaker TYPE BGround fault switch for charging station for electric cars, electric hybrids, charging hybrids. The ground fault circuit breaker of TYP B has since 2017 been a requirement for charging electric cars. We offer the right switch for a difficult price. Fits (among others) Tesla Powerwall.

Price SEK 1,679.00
More
In Stock (112 pcs.)

Reference: 25-032

63A contactor / Relay 3 modules three phase

(0)

Standard contactor / Relay three phase 63 A Contactors can be used to control loads such as lighting, heating, ventilation, water heaters, electric boilers, heat pumps - simply all places where the load exceeds e.g. what a switch or a smaller relay can handle. Can be used as a power relay for control using Logger 1010 or Logger 3030, for three-phase loads...

Price SEK 440.00
More
In Stock (12 pcs.)

Reference: 25-029

Main switch / Load switch

(0)

Main switch / Load switch Intended as an incoming circuit breaker in standard power stations (power plant). The main switch can be locked in the off position with a standard padlock.

Price SEK 182.00
More
In Stock (225 pcs.)

Reference: 26-027

Adapter Schuko to CEE16

(0)

Adapter Schuko male to CEE16 female Is an advisor to be able to connect eg. Our mobile electricity meter with CEE16 connectors for a standard wall outlet. 0.4 m cable length, Max 16A

Price SEK 199.00
More
In Stock (2 pcs.)
Comments (0)