NEW! Single phase MID certified meters with Modbus

Very advanced electricity meters that have counter, odometer (which can be reset), power meter, and more.

The electricity meter has a litted display, pulse output and connection for Modbus RTU communication.

Display error less than 1% in the range of 40 mA (9 W) to 100 A (23 kW).

Backlit display (white light)

features:

• Counter for total consumption kWh active energy (Swedish standard, non resettable)
• Counter for imported kWh (non resettable)
• Counter for exported kWh (non resettable)
• Counter for total imported energy, kWh (resettable)
• Counter for total kVarh
• Counter for imported kVarh
• Counter for exported kVarh
• Counter for total kVarh (resettable)
• Maximum power (in watts) past 1, 5, 10, 30 or 60 minutes
• Instant voltage (Volt)
• Instant Current (Ampere)
• Instant Power meter (Watts)
• Var right now
• VA right now
• Power factor right now
• Frequency right now
• Pulse constant (Normally 1000 pulses / kWh)
• Modbus ID
• baud Rate
• Counters indicating how long the meter has been energized

Specifications:

• Voltage: 230 V AC
• Voltage, min - max: 176 ~ 276V AC
• Measurement range with less than 1% error is 40 mA to 100 A (9 W - 23 kW)
• Frequency: 50 Hz
• Withstands peak voltage: 4 kV (1 minute)
• Impulse: 6 kV in 1.2 uS
• Pulse Output 1: Programmable, default 1000 pulses / kWh
• Pulse output 2: Not programmable, pulses of energy imports in 1000 pulses / kWh
• Display: LCD with white backlight
• Max counter: 999999.9 kWh
• Ambient conditions should be within -25 ° C to + 35 ° C and <95% humidity (non-condensing)

accuracy:

Better than 1% within the above specified limits.

For more information download the manual below.